Viewing all customer Discussions for:

81-174 Sliding Glass Door Tandem Roller, 1-1/8"

tandem sliding door roller no part numbers.

Hi I am looking for a replacement for these ~35 year old rollers. They don't have any marking but they came out of an aluminum door with an open bottom to the frame (apologies I didn't get any installed photos). They have 4 embossed nipples on the side that made them a bear to remove, and they are ... (cont.)

My sliding door states that it was made by Western Insulated Glass SGD-C30

Looking for replacement rollers. House was built in 1993

2 rollers per roller track assembly . Wanted to avoid taking apart the entire frame to view the track assembly by itself . Please let me know if more information is needed t asses the proper part. Thank you much for your help. Mark

L: 3- 1/8" H:1- 1/8" W: 11/16" Wheel Dia. : 1- 1/8" Dimple W: 7/8" Dimple H: 3/4" from top

I need 4 of these.

I have these 2 wheel rollers with bumps on the side that appear to help hold the rollers in place. I can find a matching size, but nothing with holders at my local hardware store.

No visible markings on assembly.

Steel Wheel O.D. = 1-1/8" Width = 11/16" Height = 1-1/16" No markings

Roller Material = steel Roller dia. = 1.12 " Body length = 3.12 " Flange width = 0.50" width of body = 0.68" Height of body = 1.12"

Housing width 11/16" height 1 1/16" length 3 1/8" roller diameter 1 1/8"

Needing the bottom rollers for my 500 series aluminum sliding glass door. Bought 11 years ago.

I have two patio doors I need to replace the roller assy on. The doors were manufactured by Superior Engineered Products Corp who are no longer in business. Hope you can help? Thank you

The concave profile steel wheel is a hair under 1" diameter measured to the outside edges. I didn't see an exact match in your inventory but 81-164 looks close. Thank you.

My local repair shop quoted me a replacement with a tandem wheel. My door has a single wheel. I ordered 81-093 which appears to be a virtually identical part and should slide in nicely. From what I can tell, there is plenty of room to slide a longer housing in, like one that would use a tandem wheel ... (cont.)

I need to replace the rollers on my sliding door. This door was the original that came with the house built in 1970. It has a sliding door and stationary door. Total width is 6', sliding door is 3'. I can't find anything on the door itself that identifies a part number. The door handle has the c ... (cont.)

It looks like I need #81-174 or #81-179 rollers but the 5 short slots are missing, Could you please advice which one is the correct one or maybe it's another. See attached photos.Thank You, Gil

First sliding door replace roller project - PLEASE HELP! :) Thank you - Mark

The trolleys that are showed above were ordered and shipped. The shiney gold plated ones are your 81-174. My problem with these are that the profile of the protrusions on the sides leaves these too loose. I received 4 loose and a bag of 10. The 4 match up with my originals. I understand that that yo ... (cont.)