Viewing all customer Discussions for:

26-244 Tilt Window Latch, Right Hand

Hi I need balances clips and the bottom piece for these windows

Rusted part is connected to balance Plastic part is lock

20 RH 20 LH

I'm trying to find a replacement for the tilt latch in the photos. Acouple look like they might work but the distance from end to catch doesn't look short enough. Please let me know if you hav one that will work.

I have AWS windows that have a hook at the top of the balance. The window frame has a rectangular slot, not square. Would you all be able to offer any advice or quote me a 27C balance with a hook instead of the screw top? I need 8 ea of those 27C with a hook and 2 ea 15C with a hook. Balance is a s ... (cont.)

Wondering if you could help with these. The 2 pictures on left the overall measurement is 2 5/8 x 5/8 if that helps Thanks Gus

I need to replace both of these latches on top of my tilt windows. They are 2 11/16" long on the top of the latch. Do you stock these ? Thanks, David

Pat. #5,139,291 On the little latch that locks in when slide it into the window at the edge it says 092 The right hand lever says 9E in the center and the left hand says 7H. The rectangle dimensions are 2 11/16" x 11/16" I don't think I have been able to find the exact one but a lot that are close. ... (cont.)

Hi, I'm looking at tilt window latch's 26-244, 26-243, multiple latch's broke. These are the closest, all measurements are same accept what I think you call stile. Stile I measured 3/32 and yours are 3/16. Do you think these would work? In the pics I believe there is a small piece missing in that a ... (cont.)

Can you help me find the replacement tilt latch? thanks

Hello I need part numbers to place an order if possible see photos please Do you have the part the part that locks the window from tilting out Measurements are length about 2 1/2 inches And the width Is about 1/2 On the bottom Please let me know I sent a few emails Thank you

Good Morning I have brought a house where several of the windows will not stay up. I am unable to find the model number or the name of the manufactory of the window. There is a logo on the window lock that is MW. I understand these parts are outdated, can you assist me in getting new parts for my wi ... (cont.)

Hello, I just purchased a house with older Anlin Catalina windows. They are in decent condition overall, however all the hardware needs to be replaced. Anlin themselves referred me to your company for parts as I am outside of the windows warranty and their service department is over capacity as it ... (cont.)

Hello,I am looking for two corner latches for a double hung window. I was wondering if you could help me identify the part(s) that I need? Thank you!

Have a window that needs tilt locks

Hi, Do you carry a latch that looks like this one?

Swisco tilt latche. 26-243/244 won't work or fit, Patriot windows.

I was trying to find replacements for these in you online store and don't have a clue where to start. These are builder grade windows to probably cheap,. but I don't know the manufacturer. I watched your video on how to remove the parts, but mine don't work that way. I would appreciate any hlep I ... (cont.)

I broke two while trying to remove these latches. I hope these photos help identify a replacement.

I need 2 right and left window latch replacements for windows placed in 1987. I'm thinking the size is 2 5/8 x 11/16 I'm thinking I need the 26-419 and 26-420. Is this correct?