Viewing all customer Discussions for:

59-234 5/8" Glazing for 1/2" Insulated Glass Units, 25'

Need Above window seal

Hi just wondering if you sell this? Do you also sell the glass for a double pane window?

I cant seem to find this glazing channel for double pane windows. It's inside width is about 22mm and its inside depth overall is 14.5mm. I would like it in white if possible.

Trying to find these 2 sizes of gasket need approx. 75' of each Color: not important

Looking for a replacement boot glaze gasket for the insulted glass unit. Units appear to be 3/4" OA and 1/2" oaThe current gasket is Tan in color. Do you have anything that could be used as a replacement? thanks! Geoff

I am searching for the rubber gasket that surrounds these 33.25 x 11 double glazed panes from a sliding bathroom window. Windows may be Viking although there are no identifying marks. Double glazes units are 5/8" wide. Also looking for small roller units that are part sliding portion of window. ... (cont.)

First picture is clearly backwards but is what I believe to be the serial number from the door itself. As you can see there are two screws on each side of the door but the top one will unscrew but not come out of the hole. The bigger screw comes out completely but the roller does not move. I do ... (cont.)

I need to replace the Glazing bead/spine on a Wenco JX-7 double hung window. window glass is double pane 28 7/16 x 28 7/16 and about 1/2 thick. this was one solid piece. I cut in half for you to see. both sides should look identical but you will see in the pictures that one side is damaged and mis ... (cont.)

Yes this glazing has the same dimensions as mine. One more question: my glazing has slots cut in to it so it fits better around corners. Does this glazing have that?

Hi im looking for channel glazing that has the following dimension: