Viewing all customer Discussions for:

55-197 3' Snap-in Glazing

Looking for this or close

The pictures are of the jalousie operator I need. Also I would like to order one of each of the glazing strips, 55-029 and 55-197, to see which one will work the best. Let know if you have a new jalousie operator.

looking for snap in glazing for Viking temp seal ALI VI-1 windows. Bronze color. The size of old glazing is 34" long x 5/8" wide for side pieces and 27 1/2 " long x 5/8" wide for top and bottom pieces.

I didn't take pictures of the glazing installed but hopefully the measurements will help. It looks closest to the 55-163-3 but there are some small differences. Just want to make sure these are what I'm looking for before placing the order. If possible please confirm or advise as to what my best wa ... (cont.)

Hello, I am trying to confirm the correct vinyl glazing bead. The dimensions are roughly 1/2 inch tall and the curved portion is roughly 1/2 inch as well. If a perfect match isn't available, something close is ok too. Thank you, Chris

Swisco Folks:Just spoke to one of your reps and I've uploaded two photos of Milgard Balancers for identifying the proper replacement. that I need a replacement for two of them as springs are rusted.Stamped number is 26-CLength end to end metal (not including white plastic) is 27 inches. I need two ... (cont.)

Could you please tell me if you have anything that will work for these windows. The plastic is brittle and I need six, six foot strips if you have them. Thanks, Dan

Can you identify what type of snap bead this is?

House is 1996-8 years old. THe window glazing bead is original to the house.

Hail damage our snap in glazing on our sliding doors. I think the color is sand. I need some 7' and 3' strip.

My French door glazing is failing and needs replaced. The pic above is a sketch of the cross section. Can you identify the part?

This vinyl bead came off of a Philips 800 sliding patio door. Need approximately 20 feet. Any suggestions would be appreciated. Thanks in advance.

I am looking for this snap bead for my aluminum windows

I can not seem to find replacement parts for this vinyl glazing. I've found similar, but not the right dimensions. I'm ok with the overlap of the glass not being as big, as long as it snaps in properly. Thank you

Snap-in for Jordan Window.

Hello I was told this is for a jeldwen window stop we need for a customer please. Measures 3/8 inch on one leg, then 3/4 inch with a vinyl attached Mike

Im hoping you can help me, im looking for the attached glazing bead for a vinyl window. Please have a look and let me know if this rings any bells Thank you Dan

Can you help me identify this part. I tried to locate it, but cannot find the right curve. Thank you for your help.

looking for a match on this glazing bead unsure of window maker Measurements Flat top ~3/4" Leg down ~3/8" Back fin ~1/4"

We are looking for this Bead. Similar to Jeldwen but the snap in is at more of a right angle