Viewing all customer Discussions for:

81-166S Dual Roller Assembly, 1-1/4"

I need to know the correct model of Swisco rollers to purchase. Attached are photos of the roller. Width is 7/10's of an inch. Height is 1 and 3/10's of an inch. Rollers are 1 and 1/4 inch. Todd.

My door is a exterior vinyl sliding glass door on a mobile home

I have an Aluminita sliding glass patio door and screen. I am looking for replacement rollers for the glass door and the screen door. also need the black latch lever for the screen door. I know you have my parts somewhere, help!Mike

The only sticker I see in the door says sgd r35-72x80. I put a picture of what they look like

Trucks have metal wheels. Height is 1 1/4. Width 11/16. Overall length is 4 1/4 (not counting adjuster screw).

Hello, I need help identifying this patio door roller. Please let me know if you have any questions or need additional information. Some of the dimensions are rounded to the nearest 1/16". Thank you, Jaime

I think the roller assembly is part # 81-158 in your roller list? The wheels are brass 1 1/4" What do you think?

I could not find this on your website.

I have many PGT Industries sliding patio doors which were installed new in 1988. I am in need of the roller sets for a couple of the doors. (2 for each door) I have found many online but they differ from mine in that the dimension between the end mounting 1/4-20 mounting hole and the adjusting scre ... (cont.)

I couldn't find numbers or markings on the rollers. Thanks

I didnt make any measurements but I brought the door New in 2010 I also need the rail replacement

This is a left hand sliding glass door for a client. I didn't take pics of the wheels in the frame. Each bracket has a metal two wheel system which straddles a metal center guide. Client states the metal guide got damaged and removed. Causing the sliding door to drag inside the bottom channel. We ne ... (cont.)

Need replacement rollers. Tape measure is held stating at the 1 inch mark

Hi, The 81-166 and 81-166S appear to be the same product, but the measurements listed on each site are off. The 81-166S is listed at a height of 1 and 1/4 in and the 81-166 is listed as 1 and 5/16 in. Is the 81-166S listed incorrectly? I need the 1 and 5/16 in height version in steel rollers, so w ... (cont.)

Do you carry a roller for the following door. This is the info I got off it: AMAA Certification MFR: PHP-28 A-L-I Validator Series 870 Type: Patio Door 870 03200328

Sliding door installed around 2005. Glass says Guardian. Two wheels replacement needed. front has two screes.

The rollers are 1 1/4", the housing thickness is 11/16", height of housing is 1 1/4", housing length is 3 1/8".

2 metal wheel roller: Specs: 1 1/4" diameter steel roller wheels Housing dimensions: 3 1/8" long 5/8" wide 1 1/4" tall

Need replacement rollers, but don't know which ones to buy. Please help identify these rollers. Thanks

These are photos of the roller compartments on my Pella sliding door that I need to replace.Can you identify them?There were no identifying marks or numbers besides pella.Thank you,Mary