Viewing all customer Discussions for:

81-166S Dual Roller Assembly, 1-1/4"

I didn't see any significant markings. outer wheel diameter is just over 1.125" inner wheel (center groove to center groove) is approximately 1" chassis is 1.250" tall x .625" thick and 3.125" long

Wheels: 1 1/4" diameter metal height of frame: 1 1/4" length of frame: 3 1/8" width of wheels: 5/16"

I think I need replacement part 81-166S?

Need both rollers

Hello, You previously replaced the handle for my sliding door. Now I need new rollers. The only information I have for the door is located on the inner frame: Series 800 SGD-LC25-96x82. I will attach photos of the rollers. It is 4" in length (minus the adjustment screw), 1.5" in height, 5/8" in wi ... (cont.)

Hi, these are pics of patio door rollers for a Philips six foot patio slider. I have two of these sliders with two rollers per door. Might you have a compatible part? Also included is a picture of the associated track. Thanks.

Forgot to measure. Didn't get install pic. Will take a chance and order till I get it right. Placed order last year. Perfect fit.

Housing is 3" and 1/8" long. It's 5/8" deep, and 1 and 7/16" tall. Wheel diameter is 1" and 1/4". Need two.

Looking to find replacements for these slider rollers. I've come close, but can't find the right height.

Wheels are 1.5" in diameter Top metal portion is 3 1/16" Width where screws are is 11/16"

I need rollers and a new track.

I need to replace the rollers that have been ground flat and don't turn anymore. I believe these are from Hayfield Window and Door Company. House was built in 1989.

Hello. I can't find replacement wheels that match what came out of my vinyl sliding glass door (8ft height). The main difference from common parts is that the housing is 1-5/16" tall; which is about a quarter inch taller than usual. The housing is 3-1/8" long and the distance from the rear of the h ... (cont.)

I am in need for a pair of rollers for the above mentioned sliding glass door. The roller pocket is 3/4" X 4 1/2" by 1 3/4" deep. Can you locate me a pair of these please. These rollers are all metal

Looks like 86-166s but want to be sure. Thanks.

No numbers or markings found. Replacements could not be found from local hardware stores.

Looking for 2 of these sliding glass door roller assemblies. I can't find any that are 1.25" on that one end.

I took out and cleaned rollers. it measures .675 wide, metal cage is about 1.30 high, 3.12 long sliding door is generic, builder grade, no name on it. house built 2003. thanks for the help, TK

Please identify a replacement for the roller in the pictures. I will also need a 1/4" track cover. I believe the p/n is 80-102. Let me know if you need any additional information.Thanks,Don

I just ordered the 81-166S and am curious what size screws I need for them. I wasn't able to salvage either screw due to age and rust!!