Viewing all customer Discussions for:

40-001 36" Door Sweep

All rubber, 36" wide x 3/4" tall x 1/8" thick ( the "T" at the top, which inserts into slot, also pictured)...My problem is that the one I have is only 9/16" tall, which lets bugs in, a PLENTY!

I have (2) untied States Aluminum storefront doors with missing and worn out brush style door sweeps (see attached photos) The overall width of the new sweeps should be about 1/2".Thanks for your help!Steve

The vinyl door sweep for our aluminum storm was sheared off the door by our lovely 6 month old puppy. Bet you get a few of these types of request. The door is 32" wide and 3/4" thick. This "U" shaped sweep is 2-1/4" in height. Do you have a replacement or a source? I anticipate buying maybe (3) th ... (cont.)

I have a 35.5-inch Kawneer door. The problem I have is that the existing door sweep doesn't come in contact with the door sill plate. This results in a draft coming in from underneath the door. How can I resolve this?

Please take a look at the photos and offer your best advice. Thanks David

need to stop air from coming under door. What do you suggest?

Where can I find either a 2.5" to 2.75" width door expander (bottom) in bronze? For a Larson storm door. I special ordered this door as it is a 30" wide door. The old Larson door that was broken fit height fine but the metal expander was 2.5" wide. Or if I could find a 1" wide rubber gasket (one t ... (cont.)

Hello, i am in search of weather strips for this door. The technician on site told me the gap that the weather strip slides into is 1/4inch, and appears to be of the wool type seal. There is a 3/8th gap between the two doors that is currently not sealing because the strip is worn. i also need ... (cont.)