Viewing all customer Discussions for:

40-001 36" Door Sweep

Need to find a replacement lower vinyl "double splined" door seal for a 2 inch thick door. I can easily find this for a 1-3/4" door. Color can be brown or white. Required length is 33-1/2" but longer is acceptable. Will cut as required. If I can not locate this seal then I will use a universal seal ... (cont.)

Looking for black pile door sweep material for a commercial property with multiple doors 1/2" x 3/16" Thank you, Jack

Hi, do you have a sweep like this one? Thanks. Jerry Frost Nominal 1/2" high.

Hi, I need to replace both sides of this bottom door sweep. Door measures 27.5" wide. Thanks!

Hi Swisco Team, We are in need of a new 142" (tile-in) track or flush sill for a now discontinued and unsupported Weiland sliding door. Hoping there is a general type track that we could use here. We are also looking to replace rollers and handle and would like a brush seal that mounts to the bott ... (cont.)

I'm looking to replace both the astragal weatherstripping and the door sweeps on both French doors. The previous owner didn't weatherstrip properly and/or hadn't replaced them. There's a large enough gap when the doors are closed that you can see sunlight coming through and lets bugs in. In one ph ... (cont.)

Hello, I need some assistance in identifying the proper part to order to replace this door sweep for my client. Any help is appreciated, thank you!

Broken Bottom trim on outdoor front door

Hi, looking to see if you have this profile of these two weatherstripping from a discontinued pro line door.

Faith Lutheran Church in Baltimore, Ohio installed TUBELITE front doors in our new church in 2008. In the last couple of years we are getting rainwater blowing in under the doors.It looks like we need new bottom seals. Attached are several photos of the doors.Can you help us find new seals?Art ... (cont.)

In need of brushed nickel or brushed aluminum door sweep for andersen storm door. Its 36 x 1 U-shaped and it's 1 inch high. Thank you. Weezie

Looking for the entire bronze sweep or to know if just the rubber bottom is replaceable. I have not disassembled as of yet. Door info: Larson. Warranty Reg# 34660032.121110901

Looking to identify this weatherstripping. It install into aluminum extruded track on bottom of all exit doors in our condominium complex. The rubber "wiper" part covers exterior edge of threshold. No door manufacturer identification found, but they are heavy high-end metal clad with wood inte ... (cont.)

I am looking for the same as 58-162, except I need 11/16" not 7/16". I need two lengths 36"

I need a new sweep for my 20 year old hinged patio door. Pella won't sell me one unless I have the door serial # which I can't find. They did say that the part # is ODCL0000 Can you help me

I need to replace the door pivot hinge please let me know what is the part #, also i need weather strip Thanks

Hello: Our front Entry Door has gradually developed a space between the door sweep and door threshold. Our current sweep measures 42 inches long and 1 & 13/16 inches wide. Our current threshold is 5+ inches wide and 41 & 1/2 inches long between the door jambs although the space in front of the doo ... (cont.)

All rubber, 36" wide x 3/4" tall x 1/8" thick ( the "T" at the top, which inserts into slot, also pictured)...My problem is that the one I have is only 9/16" tall, which lets bugs in, a PLENTY!

I have (2) untied States Aluminum storefront doors with missing and worn out brush style door sweeps (see attached photos) The overall width of the new sweeps should be about 1/2".Thanks for your help!Steve

The vinyl door sweep for our aluminum storm was sheared off the door by our lovely 6 month old puppy. Bet you get a few of these types of request. The door is 32" wide and 3/4" thick. This "U" shaped sweep is 2-1/4" in height. Do you have a replacement or a source? I anticipate buying maybe (3) th ... (cont.)