Viewing all customer Discussions for:

82-080 Mortise Style Handle Set, 4-15/16"

Looking for a replacement base plate for the patio door handle in the picture. Base plate screws to the door with 2 long machine screws, then the lock lever inserts in the middle, then the handle mounts onto the base plate with 2 Philips metal screws on the side, locking it into the baseplate. ... (cont.)

Good morning, I have a customer that is looking to replace handles for 2 doors. They would like them to be the same finish, the shinny brass finish. I have included some pictures to see if you can help me identify a suitable replacement. I have not been able to find a good identification on the ... (cont.)

I need the lock part that the little hooks hook into to lock the door. The parts that screw into the frame of the door.

Hello, Can you help identify the sliding glass door handel for replacement one. And the bottom rollers that are inside the bottom of the frame that moves. ThanksTom

These handles came on a Magic Windows sliding glass door. It is a kind of a rubbed bronze color. In the picture you can see the broken screw hole. It appears to be 4 15/16 spacing. These handles are approx 20 years old.

Says made in New Zealand. Bolt spacing 4-7/8

Looking to replace this plate. The top screw is not snug in the plate so the whole thing slides side to side.

Hello, I'm trying to identify the correct replacement mortise lock and matching handle for the original sliding patio door in a Redman manufactured home built around 2002–2008.Unfortunately, while removing the handle, the original mortise lock fell down inside the hollow door stile and cannot ... (cont.)

Hello, I need to replace the pinion in this door handle. Do you sell just the pinion or do you sell replacement door handle sets? Thanks you! Andy

I need to replace this sliding door handle. The locking mechanism works fine. Went to several stores and could not find a replacement. Can you help ? Paul

Looking to replace with same in kind or one that will fit, even if drilling is required. Only see word WOODPILE on sticker on door.

This door was installed in 2017. Handle is broken. New new handle. Door was manufactured by Vista East.

one inside handle, door installed 2005, made in new zealand (newcastle); need handle only, locking mechanism works, space between screw holes is 5 inches.

Lock mechanism broke? Latch is loose and just slides down freely. It engages the mortise locks but then just slides back down.

Hi, I just spoke with someone on the phone and was asked to send over the images for the old lock I’m trying to replace. Please see attached images. The overall lock height is around 7 inches and the distance between the two screws on the handle is about 4 inches. Can you please help m ... (cont.)

I am in need of a Milgaurd replacement handle installed by Performance Fiberglass Windows & Doors in 2011. The handle locks and unlocks by pulling/pusing the handle. The only numbers I see on the back side of the handle (moving components) is GA1- on the metal bracket and GA3 on the white plas ... (cont.)

Just the inside handle

The thumb-turn broke off. Mortise lock still works. Handle is approximately 7 inches tall with approximately 5-inch screw centers. Looking for a replacement handle set.

As seen the metal piece broke off the latch. Do you carry this part?