Viewing all customer Discussions for:

32-223 Small Side Mount Drawer Slide Pair, 12-3/16"

Hi,I have two 20 year old Scan Furniture Chester Drawers that need new ball bearing sliders.The original drawer hardware is approximate 12 1/8 inches or 31 cm long and 1 inch wide.The unique feature are the two pegs that attached to the drawer; one in the back of the drawer as well as one beneath th ... (cont.)

I need replacement and can't find them.

Replacing drawer slide on Ikea Aneboda dresser. The broken drawer slide is 13.75 inches (longer slide part) and 11 inches (smaller inner slide part). The groove on the drawer that will receive the slide is 5/8 inch wide.

It is from the Scandinavian furniture draw. Any suggestions on where I can find a replacement?

I have an older dresser with recessed grooves in the drawer sides for the rails. The drawers were removed to move it and don't go back together. Also half the drawers weren't functional because one side or the other had broken or come lose. Need to replace slides to continue to use dresser which i ... (cont.)

14.75" long .75" tall 3/8" wide

These look like what is on my current drawers but I need them to be about 17 inches long (430 mm) do you have any that length?

I need to replace the side rails for three drawers from a Scandinavian Design six-drawer bedroom dresser purchased about 20 years ago. Your part 32-223 seems to be a fit. The current rail has similar dimensions (12 and 1/4 inches long, 3/8 inches deep, 5/8 inches wide). Enclosed are photos of a c ... (cont.)

I am having trouble finding a drawer pull slide to replace failing slides in our 17 yr old dresser set. I need 44 of these to replace all of them. They are very narrow. A 14" slide would also fit, the critical dimension is the width, as they fit into a recessed channel in the drawer wall. ... (cont.)

Hello bought a tvilum dresser off amazon 2 of the actually need the drawers sliders replaced because they are super cheap and keep breaking the slides measure 13 inch x 5/8 × 1/4 deepWould need no plastic bearing holder don't want them to just keep breaking thanks

how much will the drawer open on a 12 inch slider the one I have now only opens 4 inches I can't see in the drawer

I need a set (left and right) of the drawer glides that would fit my Prepac Astrid 4-Drawer Dresser.The glides are approx 11" long. I am ok with substitutes as long as I can figure out how to affix them.

I need replacement slides for 2 drawers. They are side mount slides, so I need 2 per drawer.The old slides are 12 inches long, 5/8 inches wide, and 5/16 inches deep. There are groves carved out where the slides fit in the wood.There is a plastic insert in each slide that hold ball bearings. There ar ... (cont.)

Would you take a look at my picture and see if I have the right part? It seems right. Thx.

Only marking is TS-NO.6 Piece that mounts in cabinet is about 12-3/16" long. Piece that mounts in recessed drawer slot is about 15-3/4" long. Drawer groove is about 11/16" wide.

Two drawer tracks separated and cannot get them back together. There are 5 tracks but only need to replace two.

I see the brand Hettich. Size is 12 2/16 inches, rest you can see on pictures.I see this item , is this the right replacement? I hv 14 drawers. SMALL SIDE MOUNT DRAWER SLIDE PAIR, 12-3/16"Product Code: 32-223Will be waiting for your advise, so i can purchase them. Do you hv a retail store? Live in N ... (cont.)

Hi the above photo shows a drawer slide for my dresser. It appears to be two pieces but in actuality it is broken and used to be one unit that didn't come apart. The mounting screws can be seen at the bottom of the image then the slide gets extended and attaches to the drawer by means of that machin ... (cont.)

looking for a drawer track 12" long and by 3/4

I need drawer slide that allow open draw 12-1/2in. Draw itself: Deep: 18-1/2in. Slot: .25in. 1/4 in by 5/8 in. Drawer slider itself: 3/8in. by 5/8in. Please let me know which model correct one I need. Thanks