Viewing all customer Discussions for:

95-263 Square Cut Screen Corner With Stop

Plastic corner for screen window, 783 stamped on it.

could I get the dimension of the part that inserts into the framing

Corner block is 3/8" thick x 13/16" square. Arms are 3/8" wide x 3/16" thick x 1" long Small flange under the arms is 7/32" wide x 1/16" thick.

I am looking for frame corners for window screen. Looks to be 5/16 x 6/16. Only need a small pack. Thank you for your help

No markings on these corners

Why is this loose in a 5/16 frame?

Thicker part of the arm is 3/8" wide, but the width including the flat flange is closer to 1/2" wide. Thickness of the arm and flange together is just under 1/4". The thickness of the corner is 5/16" excluding the stopper protrusion thing. From the back of the corner to the tip of an arm is about ... (cont.)

I purchased 95-263 and 95-262 to make up some screen frames. I thought they fit into a 5/16 frame but it seems that they're sloppy. In the picture with the three corners the plastic corner that is not yours does fit snug. Did I buy the wrong ones? Is there a specific frame to go with these? (I'd rat ... (cont.)

The corner on the left is the original. The corner on the right is your 95-270 On mine, the main male part is 1/8" thick. Your male part is 3/16" thick.Both secondary male parts are the same at 1/16".My corners are labeled 783 or 782.Your corner is labeled 784.Do you have a corner that is 1/8" mai ... (cont.)

I need 2 corners

Need to know if the 95-262 and 95-263 are available in tan? We will be ordering both white and tan in large quantities.

Looking for window screen corner replacement # 783