Viewing all customer Discussions for:

81-181 Stainless Steel Tandem Roller, 1-1/2" Concave

Liking to replace rollers on a sliding patio doors. What would be the correct rollers for this application? Thank you.

Need dual 1-1/2" rollers on a 3/4" wide by 1" high mount. Quantity 2. Picture attached of removed assembly

I need 4 new rollers . ASAP

Can you help me find replacements for these? see attached.Thank you!

I need to replace the roller for an exterior sliding glass door. Just want to make sure I am ordering the correct part!

metal body two metal wheels, 3 screws, one adjustment 2 hold it in place, one in the side of the door you can see and one inside the track that you can only get to when you separate it from the glass.

Hi, I have a slider and need 2 replacement rollers. Details as follows:Internet # 205626711Model # 60555UAmerican Craftsman72 in. x 80 in. 50 Series Thanks!Joel

Back roller isn't moving, need replacement

1 1/2 inch wheels, metal, 3 1/8 long, 1 inch height, 3/4 inches wide. To replace rollers on a 6 foot glass patio door. TIA,

I have a sliding patio door with two of these rollers. Can you please advise on a replacement part?

Hi, I need to identify which part is this my Patio Glass Door Wheel Roller. I'm not sure about the measures, hope you can help with the picture with all measurements but approximately is: Wheel 1-1/2"diameter x 1/4"width Body 3-1/8" x 1" x 5/8"

I've searched for hours online and can only find steel versus stainless steel with the dimensions of my roller assy. My house is at the coast and steel will not last long. It's the same size as your product code 81-181 which has rollers to large and will not fit in my door. An help you can provide ... (cont.)

Hi there, I need rollers for my two patio doors. Thanks Robert

The wheels are 1-5/16th dia. and the unit is about 11/16 wide. Might you have anything that would fit? Regards, Mark

these are four pictures of he same wheel trolley. high rise condo on Gulf of Mexico.I will need two. If there is a model with slightly smaller wheels we wouild likr those.also, if you have the snap on stainless steel rail we'd like a piece.Pete

I need two new rollers for my slider. Door is 1984 model. No markings on the hardware.

3" Long 3/4 wide 1 3/8 hole from front Wheels 1 1/2"

The door has no markings or number, the rollers seem to be about 1 inch in diameter. Thanks for the help!

looking for replacement wheels for fleetwood sliding doors from 1982

The old rollers are 3 inches by 1 inch.These are from a 30 year old mobile home.Thank you, Darrel