Viewing all customer Discussions for:

90-318 Truth EntryGard II Sash Lock, 2-1/16"

Hi I need latch replacements, but not sure which one is it. Please help.

Lock number is 45226. Latch is 1/4" thick.

Please see attached pictures

Hi, I ordered some truth window lock keepers from you guys but they were too narrow- the older version that I have is ~3/8" wide vs the newer version you sent me which is 1/4" wide. Would you guys still carry the wider version? Thanks.

Can't find any brand names on the latches or the windows?

Need 1 window latch for MI double hung window. Manufacturer is: "MI Windows and Doors". Our house was built in 2017. The latch color is "Clay". The metal part of latch has "L 3" embossed. Please see attached pictures.

Looking for replacement sash lock and keeper as shown in attached photos but in white. Labeling on sash lock is Entry Guard Truth 40264. Approximate dimensions: Overall length of lock is 2 1/2", width is 1 1/8" and distance between mounting holes is 2". Also looking for replacement tilt window ... (cont.)

I am looking for a strong sash lock and keeper for a heavy wood top sash. The current lock and keeper is not strong enough to keep the upper sash all the way up, so there is about a 1/8th gap where the top of the sash slides up into the recessed area. Do you have a recommended hardware to address ... (cont.)

Truth Window Lock / Entry Gard is wrong size (too thick) need 90-161 with narrow keeper and 2 1/16 spacing. I already ordered and tried 90-077C and 90-279 and they were too thick so I think I need the 90-161

The dimensions seem to match, although your image 1 looks like it bows a bit on the outside. Also, looking for black and image 1 looks gray. Thanks for your help. Randy

the sash lock I"m looking for matches part of your description, (truth entrygard II) but mine is labeled Entry Gard 40381. And since I cannot tell from your photo how deep the lock is, I don't know if it will fit my window. Mine is an inch and a quarter deep.

This is a 90's hurd window.

These latches are on 22 year old Marvin double hung windows. The center to center measurement on the large piece is 2 1/16...other measurements are in one of my photos. The only markings are on large piece. It says "lock". There is a patent number underneath. 5.110.165

8212 on the keeper 3211 on the sash lock 2 1/16 screw center

Hi Friends:Please see attached photos of my Caradco sash lock. They are 2-9/16" wide with screw holes 2-1/32" on center. If you have these in any color (though I would prefer the original brown) I would like to order 4 units, please.I look forward to your response.Thanks and all the best,Tom ... (cont.)

If it heps, I believe the windows were manufactured by Caradco.

Looking for bronze colored sash lock for Rivco window made about 1993. The inside portion, raised center section is curved, not squared off. Shape of inside portion where it contacts the wood sash is also curved with straight end sides.