Viewing all customer Discussions for:

26-326 Pivot Bar

I need this part.thanks

These latches slide into the top of the sash from the side. I also need both of the lower pivots and two of the screws.

I am trying to purchase these for our windows. I believe they are pivot bars? And I believe our windows are survivor thermal pane single hung vinyl windows with 3/4" insulated glass and tilt sash. Our home was built in 1998 so that tells you how old they are. Do you have these or something that woul ... (cont.)

hi! good morning.attached is pic of broken pivot bar for my windows. probably need maybe 10 of them. i checked you site and looks like model #26-326 is the correct one?? i attached that pic also. do you agree? the size matches up almost perfectly.also need a few windown tilt latches but i don't ... (cont.)

This part screws into the lower corners of the lower sashes on my windows and slips into the pivot mechanism. Unfortunately the part the fits into the pivot mechanism is broken off on many of them and they need replacing. The part is metal and has a 1 marked on the side

A marking of "1529" is stamped on. Pivot bar is roughly 5/16 or 3/8 wide. (See photo) Screw holes are about 5/8" apart Thanks a million!

Customer sent me pictures of this part. The "assembled" photo he sent me is not put together correctly. Looking for a part similar to this.

Do you have this part for our window which are 8 years old?

There are some small differences in measurements with 26-310 if you don't find the exact same one, please get me the closest one that has mainly the pin measurement that fits in to the window track connection. Thanks so much

Looking for this piece or alternative 3/8 x 1/4 x 3/16

I have a Jeld-Wen window that we purchased around 2006. The window will open but won't stay up. The springs are there but the metal part that is attached to the bottom right and left of the window is broken. It goes into the hole at th3 end of the spring assembly. Picture 1 and 4 is what I need. T ... (cont.)

Need part number for Spiral Balances,3/8 30" long blue tip, 3/8 34" long Orange tip Sash Pivot Bars,.327" wide,.374 deep, center bar is .138" Bars are plastic, upper are broken in windows. Lowers can be seen in photo. Pivot shoe is 2" long, 1 1/4 wide, 5/8 thick, which I think is your 15-047 shoe? ... (cont.)

I am looking for the parts in the attached pictures. They mount on the window and allow the sash to be tilted in. Any help is appreciated.

This is from a 3050 6/6 white low E window

This is a hard plastic L shaped piece that has the pin part broken off. I need a replacement. Thanks

Greetings- I am looking for a set of pivots, they are marked 1556-1 & 1556-2. Attached, please find the picture. Thank you for your help, Lance Your Ultimate Handyman

Hello, As you can see, this small metal piece broke in half. It is located on the bottom of the window and I think it might be a window guide(?). HERE IS THE NUMBER STAMPED ON THE PART: 1556-1 MANY THANKS FOR YOUR HELP IN IDENTIFYING THIS LITTLE PART! -c. keith

When cleaning my window, this part snapped off. It is a T shaped latch that connects to my widow's counterbalance/spring assisted fully system

Looking for some window parts! Have you seen pivot bars or balances like this?

screw holes line up but the pivot tab is wrong. don't know the window manufacturer ordered and got pivot bars 26-310 with a code of l-1567-1 but the bar is too wide. what can i do to fix this?