Viewing all customer Discussions for:

32-003 Rear Drawer Track Socket, 1-1/4" X 3/8"

This part goes in the back of my cabinet and holds the track to my kitchen drawer. I have one center track.

HA8321

Our kitchen cabinet center slider is broken. It appears this way. The white part is the broken one.

My old chest has a 2" vertical brace with 32-003 rail supports attached to it with large staples. Over the years the 32-003's have failed at the box seam. I've replace them multiple times, but the wood brace is too narrow to attach using screws and the multiple outer holes. I think I need a rail s ... (cont.)

The drawer slide (image drawerslide4) keeps coming off the plastic rear drawer socket. I believe I used part #32-003 or 32-005. How can I keep the drawer slide. Is there anything deeper to secure it better? What else can I do? Would it be better to just get new hardware? Thank you for any ideas. The ... (cont.)

I need a bracket with a 30 mm opening where the slide goes and is 65 mm long

The only identifying number I could get from the drawer was from the slide attached to the back of the drawer. It's a number 452. The slide itself seems okay but the end cap that the metal rail from the drawer seats into broke off. I believe you don't use the 452 slide anymore but I'm hoping you sti ... (cont.)

I have a kitchen drawer in which the back support for the rail broke. I have some pictures of the rail in question. Do you have a back support that will fit this rail? The slide rail is on either side of the drawer. Thank you for your help. Bill

this product looks lust like mine. however, my measurements are 1-3/8" x 3/8" on a side mount slide application. My track overall measures 1" x 3/8" 22" long. Will this fit? Please advise, so I can place tje order. Thanks, James