Viewing all customer Discussions for:

32-009 Rear Drawer Track Socket

Hi, I believe the width for the guide is 1 3/8 or close. The color is black.

Trying to locate a rear drawer guide bracket.

Please identify these kitchen drawer parts. See attached pictures.

This is a 39 year-old rear mount for a drawer slide. It's in a kitchen cabinet and is broken. I can't find this part anywhere. Any help would be appreciated.

Looking for this draw rail mounting bracket you manufactured Base is 2 5/8 in by 1 1/2 inch Thanks

I am not quite certain what these are called. These are off a drawer pedestal from an old waterbed. I need to replace the rear holding bracket and the plastic clip that keeps the drawer on the steel center rail. any help would be appreciated. I could use a 6 of each item. Thank you DougI am a retail ... (cont.)

See photo - this piece broke (the plastic cracked and isn't holding the channel/slide). It is a Delta Series 50 - I don't see this replacement on your website. Please advise if it is available.

I'm looking for help in finding this piece to fix my other drawer. Dimension width was about 1 inch inside plastic piece. I don't have any part information other than the table is a broyhill that we purchased new 20 years ago.

Looking for brackets for waterbed drawer which over time have broken

White plastic (nylon?) rear bracket to hold metal runner for drawer slide. No markings visible. Part in removed pictures has been epoxied back together. Approximate dimensions: Mount plate with holes - 2 3/4" L x 1 1/2" H Receiver for metal slide - 1 3/4" L x 5/8" H x 9/16" D

Hello, I'm hoping you can help me with this. I can not find this part anywhere.Thank you,Judi

These are broken....needing several

This part goes in the back of my cabinet and holds the track to my kitchen drawer. I have one center track.

HA8321

The rail broke away at the back of the cabinet. Drawer is fine.

My old chest has a 2" vertical brace with 32-003 rail supports attached to it with large staples. Over the years the 32-003's have failed at the box seam. I've replace them multiple times, but the wood brace is too narrow to attach using screws and the multiple outer holes. I think I need a rail s ... (cont.)

Hello. Can you please help me find a replacement rear drawer guide socket? The internal dimensions of the existing socket are 1 3/8" x 7/8". The guide width at the widest part is 1 1/2". the narrower part is 11/16". Thank you.

I have a kitchen drawer in which the back support for the rail broke. I have some pictures of the rail in question. Do you have a back support that will fit this rail? The slide rail is on either side of the drawer. Thank you for your help. Bill

I am looking for a part the holds the front of the drawer guide on, The Rear socket I use is #32-009 & the drawer guide is #32-088. What part would hold on the tapered down front of the guide.

Hello , I hope you can help me find the parts I am looking for , please see photo. Need 10 pieces. Thanks Respectfully, Jeff