Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

These are photos of a replacement kit from Fibertec for their casement windows. I need several of these, both right and left opening, but would like to source them in the US. Here are numbers, one on each of the three arms of the mechanism. 3306R2H 10TL 19010W 3301 19010W 3303

From Your side I choose part # 38-095 right slider and Dual Arm operator,Sill Mount part # 39-253LB

These are 2004 Truth Entryguard mechanisms. I was wondering :1. Do these have an adjustment nut ? and do you sell the wrench so they cant be adjusted (the windows rub/sag and need small re-lignment needed.OR 2. What is a good replacement that can be adjusted ?It is my condo in NJ but I live in Fl ... (cont.)

Hi,The arm hinges on my Crestline windows are starting to shear off, and I need to find replacements. They are circa 1994. The existing arm hinges are printed Truth 40018 and 40017 (left and right sides). They are approximately 12 inches long when measured along the longest piece (the one that is ... (cont.)

I need a replacement mechanism for a casement window that rusted out. Jeld Win said that they don't warrant against the elements so I'm stuck with a window that won't work. Please help me find the correct replacement hardware.Thant you for your assistance,Russ

I need to replace the mechanism that open the windows. need part# to order

We need the part that screws to the bottom of the casement window and holds the window in place. We have POZZI WINDOWS that are about 38 years old.

Hello , thanks for the help !We have a bay window that needs a few parts for repair.Looking at bay window from the inside of house the problem window is the far right side. The locking mechanism is broken, bent. The top bracket also broke, so the window is "closed in place", but needs both the top ... (cont.)

I'm interested in a replacement of the clip shown here that has a number 3 on it.

Looking for a complete replacement including bottom track(measured roughly 91/4"), and crank operator/arms. One arm had the following stamped on it 30905 should it be helpful at all.

Please tell me the part # needed to replace the piece(s) in pictures

In the past we have replaced broken split arms with either 39-329 or 39-330. Worked great! We are having issues with the upper brackets now. Will the 36-048 hinge set work here?

I am looking to replace some worn hardware, install a folding bronze handle and cover with matching locks. Ideally it would come with the operator. I am also going to reverse the swing on several of the casement windows so I need to know what is a right and what is a left part number. Lock and Kee ... (cont.)

Looking to replace left and right weathershield cranks and crank seat and four window locks with compatible polished chrome hardware. Window lock latch The hinged operator has part number 6DDOOP

I'm looking to get this replaced and also need hinges I don't have a photo or measurements on the hinges but hopefully it's something that can be matched with the operator any help is appreciated thanks Rob christian

Need upper hinge please tell me what to order. Millgard window

I am able to open it, but unable to close it. I'd like to replace the whole thing and it looks like 39-187 would be the right choice, but I also saw the 39-089 and want to know the difference. Does it matter that the detach clip in both of the above parts that you sell slides under the arm instead o ... (cont.)

One arm says Truth 30905. The other arm (underneath) says 30744. Thank you for the help!!!

I have casment window that is loose from tm bottom needs to replace the hardware

Hi I like to order this style hinge for a project where I have built the windows and want them to open outward