Viewing all customer Discussions for:

32-053 Drawer Track Kit

Please see attached photo of drawer socket for reference. Need approx. (16) pieces of drawer socket and matching runner. Thank you

I refurbish dresser and would like to buy the metal guide which goes to the drawer and wooden tracks that fixed to the dresser base. I cannot find any similar in your shopping list. Photo's are uploaded to identify the part. Appreciate your response

Hello SWISCO team,I am trying to track down a bracket needed for a used dresser that I am repairing. The bracket is mounted to the back of a dresser drawer and accompanies a center mounted wooded drawer guide. There is no part number located on the piece of hardware. Any assistance you can provide i ... (cont.)

the rail that my drawer guide hangs from is wood and worn. Can I add epoxy to the top edge of my drawer guide so that the guide does not fall off of the worn rail? Thank You

I am trying to find replacement pieces for a few drawers on my Lexington high boy dresser that are broken. The drawers no longer run on their slides and the rear mount drawer slide guides are broken. Do you sell parts that I can use to repair this? This has been and exhausting and frustrating hunt ... (cont.)

Am looking for a center drawer slide track like this, 18 5/8 in long

Stanley dresser. Label shows: 619-94-02 I think it is a Rite Trak ll

Have a nice dresser that needs the metal guides replaced. Some are bent and unusable. Where do we find the metal that goes to the parts 32-081 the kelin case runner and 32-076 the socket. The actual metal part the drawer slides on. Need 14 and 1/2 inches long. 5 of both top and bottom. On the metal ... (cont.)

We have a wooden dresser and one of the tracks for the drawer has broken. The drawer itself slides over a beveled edge track. I have included some pictures of the broken track, good track, and the bottom of the drawer as well. The length is 16 7/8 long and 1 3/4" wide. I'm hoping you all can help ... (cont.)

Do you Carrie this Kenlin case runner with roller

Needing this plastic piece for drawers. Cabinets pretty old. Inside cabinet door says IXL Furniture, Division of Westinghouse, Elizabeth City

I have several late 1970's-era kitchen drawers with rollers that are broken and would like to attempt to repair. From I can see on the Swisco website, the part with the product code 32-040 seems to be an almost perfect match with the part I took a picture of and sent with this email. Would this be ... (cont.)

Please let me know what runner and socket to order. Is the heavy duty worth buying?

I need this part to fix my dresser

The wooden drawer guides are cracked and worn out. Would like to replace with metal such as your 32053. What do you recommend? Bruce

need ball bearing drawer slides 3 1/2" long x 6/8" wide

Center mount drawer track, 1-1/4" wide , 1/2" deep , 15" length or longer.

Looking for a replacement track. The only information on the track is the "Ronthor" brand name. No serial numbers or any model numbers are present. The dimensions are hand written in the picture above.

Looking for 3 sets of these. 16" long and 15 3/5" long for Bassett dresser. The plastic twice is marked with your company name.

Hey Guys, Think I found the track guides I need to replace for some Stanley bedroom furniture (Kenlin case runner 32-076 & drawer socket 32-082), but I need to replace the actual metal tracks as well. Most are kinda bent like the one pictured. Do you carry them as well? Thanks, Jim ... (cont.)