Viewing all customer Discussions for:

32-058 15-3/4" Self-Closing Drawer Slide Pair

That green thing holding it was just so that it wouldn't fall. I can't find this anywhere. Where can I buy this rear drawer bracket?

The only markings seen are Unigrass 6600 One of these on the drawer is bent near the roller and needs replacing

Hi there,From other posts, I'm thinking these plastic clips with pegs are nearly impossible to find. The pegs broke for one drawer, so now the rail won't attach to the back of the cabinet. I'm guessing I'll need to reinforce the back with wood and find a new rail system with screw-in back mounts. An ... (cont.)

I need to replace the actual drawer but the drawer slide and bracket need replacing as well. Can you help find the parts or suggest something similar/better? The bracket is cream/off-white and holds the drawer slide at a 90 degree angle. The bracket has plastic tabs on the back that holds onto the ... (cont.)

We need to replace drawer slides on our 20+ year old Scandinavian-Style dressers. The drawer slides have become misshapen and the bearings have fallen out. They are very slim and about 10" long. You can't remove the drawers without unscrewing to separate. On the drawer, the very back hooks under ... (cont.)

The cabinets were installed in 1992 by the previous owner so I do not know the manufacture. The inside dimensions of the socket are 3/8 by 15/16 and 1 1/4 deep. The exact replacement would of course be best, but if there is one that requires screw mounting with everything else correct then that wo ... (cont.)

need 3 sets. Side mount. The outside metal circular tabs fit into metal frames installed inside the cabinet. Cainets installed 25-30 years ago.

Hello,I have a roller that broke on our dresser track. Do you sell drawer track that I need. Please see photos.Thank you,George

track back plate has broken so there is no suport for the side rail. I think maybe I need 32-089? My side rail is 1" wide. The back plate is broken in a couple of drawers--1 is a kitchen utensil drawer that is about 22" deep and other is a desk drawer that is about 16" deep but except for the len ... (cont.)

Looking for p/n for a rear press-in drawer slide mount (plastic piece) as seen above in the picture.

I want the rail that your part #32 040 goes in

Hello I am looking for the above brackets used in the kitchen cabinet drawer slide support. Attached are front and back faces of the bracket. Would appreciate if you could assist in finding the same.

Hello: One of our kitchen cabinet pantry's drawers fell and saw that its rear bracket for the drawer slide was broken. Was looking to see if you have this bracket. The attached 2 pictures show the broken one & a working one. Looking forward to hearing from you. Thanks

Part is broken (both sides) Mounts to back of cabinet.

I am looking for a drawer socket for a Scheirich PPW098 88. This socket slides on a metal anchor strip that is screwed into the back of the cabinet.

That plastic/nylon piece attached at the rear of the cabinet that the rail attaches to.

I am looking for this specific Side Rail Holder. Please let me know if you carry them.

We need a left and right side white UNIGRASS 6000 drawer replacements. Thanks

Cabinet Reel holder

Home was built in 2004, this was when the drawers were installed.