Viewing all customer Discussions for:

32-058 15-3/4" Self-Closing Drawer Slide Pair

This opening for the slide to fit in is 1.25" All of the new ones I find at hardware stores are 1" or 7/8". Can I find this size anymore? Cabinets are about 20 yrs old

This is a plastic drawer slide guide that goes in the back of the cabinet. The metal slide goes in the plastic piece. I do not have the name of the company that installed the cabinets nor do I have the name of the cabinet as these were installed when the house was built. Kindly let me know if you pr ... (cont.)

The top set is from a pull-out drawer in kitchen. The bottom set is from a drawer in our den. No part numbers are displayed on the parts. These are both from cabinets installed in 1991. Can you help me to determine as to which replacement parts I need for the sockets and glides if necessary. ... (cont.)

Medallion kitchen cabinetry Wheel or caster on side of slideable drawer

Do you have anything to replace this slide? 2@undermountedon bottom of cabinet . Wheel shaft broken ,Total length of slide is 16 3/4 " . The drawer itself is 32 1/2 x 16. Hope that helps? They are schrock cabinets

What exactly does self closing mean

My drawer left slide(facing my drawer) got bend I need an replacement part with screws .. bend slide has Unigrass 6600 mark on side and 5 G on the other side.

The drawer guide attached to the drawer, the Plastic roller wheel broke off. Need to replace two.

Need to know if I?m ordering the right part?

Years ago I purchased the credenza. The length of the rails is 15 3/4". The height of the bottom is 3/4", with a 1/2" lip.I was checking to see if you might have another color like brown, or black?Your Product Code: 32-058, is 15 5/8", would there be that much difference?Thank-you. ... (cont.)

Could you help me find a replacement for this drawer slide? It's marked "Sequar", measures 15-3/4" long, 7/8" in the narrow part towards the rear, and 1-3/8" towards the front. Thank you, Mark

Hello - Can you help us to identify and purchase a drawer slide that has broken. I have attached three photos. The slide is about 16 1/2 inches long and 7/8 inch high. The plastic wheel has chipped and broken. The letters "CR" are on the slide. (Please see photos). The unit itself is a 3-drawer d ... (cont.)

I'm looking for several pairs (i.e. L&R) metal drawer slide. These were used on wooden dresser drawers in cabinet made by Thomasville for military use in on post housing. Drawer slide is marked Made In Austria, Number: MR20314/400 On the drawer, slide is L shaped attaching on side and bottom edge ... (cont.)

I am in need of a drawer slide for a dresser. Facing the dresser, I need the slide on the right side. The part I need is the one on the dresser side, not the drawer side. It measures 15 3/4 inches but I believe I could use a 16" as there is an inch extra beyond the slide in the back. ... (cont.)

TWIMC, The little wheels/rollers came off the side of a dresser drawer. The drawer itself has heavy duty metal sides (6" x 14-1/2") and the drawer front, back and bottom are wood/MDF. There are plastic brackets attached to both sides at the top back, where the metal sides meet the wood back. Thes ... (cont.)

I have a bathroom vanity with a drawer assembly that has a pair of 1/2" (Outside diameter) wheels that fit into a metal track. The wheels (one on each side of the bottom of the drawer -- in the very back) are attached to back of the drawer with two staples. I would very much like to locate a pair of ... (cont.)

I need a few replacement nylon rollers for my drawer slides. The rollers I need are 7/8 inch, with 1/2 inch holes. The first picture is of the drawer slide without the wheel. The second picture is of a complete drawer slide. The third picture is of the broken wheel. I would appreciate any hel ... (cont.)