Viewing all customer Discussions for:

82-030 Sliding Patio Door Handle Set, 3-15/16"

Hi we need to get a replacement handle/lock for our NAMI sliding door. Any chance you guys would have it? All the info I have I uploaded in the attached pics. Thanks so much.Angela

Any idea where I can find this 70s handle?

I also have this same door and need both a handle and new rollers. I do not have a photo because the door has not been removed. Any chance there was a previous request for a part number?

Looking to replace theses and can't seem to find anything similar online

Hello. I have several midcentury sliding glass doors. For one, the handle (wood? plastic?) and lever broke off. For the other, the locking mechanism inside the box is missing as the previous owners sealed up the door. Worst case, I'd love to find the handle. Best case, one with the locking mechanism ... (cont.)

We need a latch for our patio door. Top to bottom is 9" 5/16. Do you have any?

Hello, I need the parts posted below (mortise lock and keeper) as well as the sliding door handle. PAT # 6.264.252 PAT # 5.820.170 Looks like dimensions are 10 inches and 11 inches. Would appreciate your help prior to ordering.

Broken screw for door handles. Screw sheared off in door handle. Need handle and screw.

We had this double sliding door installed and our contractor lost the hardware It looks like there is only one latching mechanism on one side, but both sides have holes drilled out. Can you tell which hardware will work and get the door to lock and close tight? Right now there is a gap. ... (cont.)

I pulled out a doggie door and need to replace the keeper plate on the door frame for a double hook lock on my New Castle XT/Insulate 960 sliding door . Measurement from top to bottom of locking mechanism component is 9 inches Attached is a photo of the locking mechanism that i need a keeper plate f ... (cont.)

This is a patio door handle for heavy hurricane windows. Black in color the handle is 9 3/4"tall, 1"wide, 5/16"depth. There are 2 screws one is 3" from top of door handle and second screw hole is just about 7" from the top of door handle. The 2 screws are 4" apart.

SD-R25-1829X2023 (72x80) I need a replacement handle for this door (or a service to replace the handle. I cannot find any other identifying information on the door.

ordered a few parts here but no luck. i have a SGD-R20-143X95 Series 1000 sgd P.L# 043-017 conforms to cmbso. we need the door handle and lock keeper. please help.

Hello, our Guardian patio door handle broke so I purchased a replacement. However I can not find a mortise latch that will fit. The inside opening measures exactly 3 inches yet most commercial mortise latches measure 3 15/16 etc, always a touch bigger than 3 inches. Where can I find a replacement? ... (cont.)

Hello, and thank you for helping me. I am almost sure your legacy handle is what I need to replace my broken part. Mine does not have a lock. I need the handle and the part that goes inside. Measurements look accurate too . Just asking you to look at my pics for your visual thoughts. ... (cont.)

Hi, Within the last year I purchased an AMERICAN CRAFTSMAN 72 in. x 80 in. 50 Series HVHZ Approved White Vinyl Left-Hand Sliding Patio Door with Blinds from Home Depot. The slider handle did not include a lock. I would like to either add a lock to the existing handle or purchase a new handle with t ... (cont.)

I need a replacement latch for my BF Rich sliding glass door. The door was installed in 2016. Attached is a photo.

I need to replace the sliding door handle. I do not have a manufactured name.

Looking for the this if you have it ? Both broke

Can you help identify a replacement handle for the patio door in the attached photos? I need the handle to work with the existing lock mortise if possible. The door thickness is 1-3/4". The lock mortise measures 3/4"w x 6" long. The screws that hold the broken handle are 3-15/16" on center. ... (cont.)