Viewing all customer Discussions for:

32-081 Kenlin Drawer Socket

My husband and I have the Victorian Sampler collection and we are needing the plastic parts for the drawers. Please let me know if they are available. Thank You Chad

Slot is 15/16" wide and 1/8" height

Can you assist in helping me purchase the correct guide. Please see attached photos. Thank you

Dresser is approximately 50" x 38" Drawers are about 14.5" by 30.5" by 8.75" I am in need of all parts for the tracks on all 5 drawers If you need more exact measurements please let me know

Any help ordering the correct part is appreciated

They say Kenlin, Pat Pending, some have a number 1 and some have a number 2 on them.

I have a dresser with drawers and all the rear guides are broken not allowing the drawer to close all the way. I looked at your web site and I'm assuming Product Code: 32-082 is the correct replacement part but I was wanting to make sure.

I have a tall bureau and nightstand - all of drawers stood snd the glider thing are broken or missing- I coukd not find a part # on any of the pieces.

Left is dresser guide Right photo: left is attached to back of drawer, right is the broken piece Part for Vaughan-Bassett dresser

I am looking to replace all 15 of these, as you can see most of them are busted. Is the correct replacement part Code: 32-081. And then I can use the appropriate stopper end as well. I didn't take a pic of those, figured they would match up if I am getting both pieces. Let me know if I have the righ ... (cont.)

do you have anything that replicates this system?

Hi I have a drawer slide, 2 metal pieces that slide over each other, with some kind of plastic piece that goes in between to stop metal from grinding against metal. The plastic piece has broken. On a different plastic piece I see Kenlin A10.

I have the metal runners but I need the plastic ends ( front and back) that hold the drawer in place as it is pulled forward and back. I have two drawers needing the replacement ends. I had a page from your site on my computer showing dimensions, but I somehow lost it. If needed, I will try hard ... (cont.)

I am looking to replace around 5 of these drawer sockets. I am unable to locate them in the hardware stores. I believe it is a 32-081 after watching your youtube video. And I would like to replace it with the heavy duty socket. Thanks for your help in identifying the piece I need. ... (cont.)

Hi! What can be done? I triee to look for this guide without any luck? Can I just replace all the tracks and the guide with new parts? Thanks

Guide for drawer. Please help so I can replace.

Need both the male and female plastic part for a dresser. Can you help

only information on the back of drawer stops are that they are Kenlin...no numbers...the opening that rides on the metal center bar is 1 3/8"...can you help??

Do you have the part above? If so how much?

I have the 32 081 sockets and they are all broken and need to be replaced. Can I substitute with the 32 082 sockets without getting into any other issues? The bottoms of all the sockets are broken off and was wondering if the metal surrounding the socket would make them less likely to break. ... (cont.)