Viewing all customer Discussions for:

32-325 Long Glass Retainer Clip

Im looking for vinly glazing to replace the glazing in a china closet. It has gotten hard with age and does not hold the glass very well. sorry but I dont have any info on the make or model of the closet. I hope the pics provided will help. Thank you Jim

The part we are looking for holds the glass in the doors and sides of our china cabinet. It is "L" shaped with a screw hole for a #6 (approx) screw. It is approx 3/4" long, 1/2" tall, and 1/2" wide. Pictures are included. If you have these we need 30 of them, and just about all of them in the ca ... (cont.)

what is the distance from hole to the point which retains the glass? i have to replace broken clips and i don't want to have to drill new holes thank you!

We have Neff cabinets doors with 32-324 glass clips that rattle. We could use a 3/16" offset, but it appears you do not have it. Is there anything we can put behind the glass to stop the rattle? Is there some kind of clear gasket or the like? A bead of silicone caulk will not do as we need to remove ... (cont.)

I am in need of some of these cabinet latches (see attached). The idea is that the depth of the back of the cabinet is 3/8, but we're putting 1/8 glass in the cabinet doors, so the latches hold the glass in from the back of the cabinet door.

Not sure how show you a pic thanks Gary

1" length 7/16" wide at the top 3/16" thick 1/16" offset plastic button Thank you.

I need these small items

Looking for 50 of the above with screws. Please advise. Thanks Neal

I'm looking for clear spline to hold in the glass on our new cabinet doors. Attached is a photo of what I'm looking for and the other attachment shows my door. What do you suggest?

We have a Lexington China hutch and the brown plastic clips that secure the glass panes into the hutch are deteriorating and need to be replaced. We need 36 clips. I have attached pictures. Thank you for your assistance! Richard

Looking for this glass retainer clips. They are from the Pulaski furniture line. The clip is from a curio cabinet model number 102003. The clip has 4811926 marked on it.

Dimple Clip Product Code: 70-209 with 5/16" or 3/8" offset vs. 1/16"

I have a china hutch that is in need of glass retainer clips...not sure if your 32- 325 will fit or not. Can you help me? I have attached photos. Thanks

I am looking for replacement clips for a china cabinet which has plexiglass recessed panels which require these clips to secure them. The clip is approximately 1" long, and there is approximately 1/2" from peg to centre of opening. The peg itself is approximately 5/16" high. Would you have s ... (cont.)

I need to replace plastic clips for a storm window panel. The old clips are one inch in length and 1/8 inch thick although slightly tapered. There is a 1/4 inch right angled section that holds the window in place. Help.

I'am looking for clear plastic clips that holds glass in a curio cabinet. Thank you, Diane

I am fairly certain that I have found the correct part (product # 32-325). The measurements seem to be just about the same.

need to replace if you have them in brown this are plactic all most all are broke