Viewing all customer Discussions for:

81-295 Patio Roller Assembly, 1-1/2" Dia.

Can you please identify the carriage and roller shown in the attached photo? I need two of them.

A helper yanked it out of the slider because the wheel was flat. Now it's broken.

Double glazingsliding door wheels are damaged dimensions: I have uploaded the dimenion picture

patio glass sliding door roller replacement

No id numbers all metal including roller 8-10 mm x approx 40mm approx 50 years old

I have a patio door with an unusual roller. The height is adjusted with an inserted aluminum piece that rolls over an angled shim. The shim (or wedge, or cam, or whatever it's called) has a flat side with Do you have a replacement for this wheel assembly?

Several days ago we called about roller replacements. Here are the photos of the rollers.The first photo shows the lower frame which supports the glass and holds the rollers with a screw securing the roller assembly to the frame.The second photo shows the approximate dimensions of the roller assembl ... (cont.)

Dimensions: 3/4" width, 1 3/4 Height, 1 1/" aluminum bearing

Trying to get new Rollers for Ca. 60,s built home with what appears to be original aluminum glass sliders. No I.D. On doors.

Looking for two of these: 1 3/4 " x 3 1/2 " x 7/8" with a 1 3/8" Diameter wheel Thanks,

Attached are pictures of the wheels we need for sliding glass doors at our facility. I hope you can get us a good match. Thanks, Alex

The grid in the pictures is 1/4 inch. The sliding glass doors should be 1963 era. I need parts for two sets of sliding doors. I'd also like to get extras!

I have a complex with aluminum sliding glass doors. The housing for the wheel bearing are destroyed. Cant find anything similar. Wheel reads " Syracuse NY "kilian" Toronto canada. 1-11/16

Entire roller assembly: Length: 3 1/2" Height: 1 3/4" Depth: 7/8" Wheel: 1 5/8" diameter 5/16" width ball bearing

1 1/2 housing 1 1/2 Diameter wheel

Has an 1 1/2 inch metal wheel

Hello we need replacement rollers for our patio door. Please let me know if you have this.

I ordered a few rollers from you guys, the ones we ordered 81-295 are not exactly identical and hence not fitting onto our old 1960s sliding patio door. Here's a pic of the original compared to the 81-295 (on right). Do you guys sell this part? width 5/8 height 1 5/8 depth 1 1/4 After trying ... (cont.)

The door was installed in the 1960s. Can you identify the sliding glass door roller?