Viewing all customer Discussions for:

39-040 Telescoping Push Bar Operator

I need help replacing this particular push bar with hinge probably eight of them in total

What you see pictured is what's left of the original parts for this octagon port type window. It's hinged at the top and looks to be pushed up outwards. Looking to make the window functional again.

I'm in need of the two plastic parts specifically. The hook that holds the bar in place and the block.

Need the opener part for these type of windows

I need the handle & slot it goes thru window will not stay open something is broken

The piece we use to push out and pull in this shower window has rusted off from the piece attached to the window. How can I fix this?

I am looking for windows arms for our church. The long arms is about 13 inches long, 5/8 inch wide, 5/16 inches thick. I am also looking for the "ring" like handle that attaches with 2 screws.Thanks John

Hello, Lost our house in recent fires. Bought another 1940 built house. All window operators are of this type. What make are they? Are there replacements?

Looking for replacements

Looking for a replacement for this product.

House built in 1970. These telescoping handles push out to pivot the windows open.

No name square Damaged teeth slipping 10¾" from center bolt to end of square shift. Has a square key on crank side

would be very grateful to know if you have this type hardware in stock. Length of bar when extended is 17-1/2". Windows were installed in 1966.

I need a bunch of these, Andersen doesn't make them anymore. Do you have something that will work?

DO YOU CARRY THESE LATCHES STILL

Hello,I really hope you can help!!!!! Attached are photos of my old porch windows. House built in 1909. I have all the original cranks, replaced the original hardware at least 10 yrs ago, but the guy does not remember where he got the hardware. :(I replaced that hardware last year with the curren ... (cont.)

I have a window that has a bar that can open and lock the window. It's mounted on a pivot joint so it can rotate freely. Used on an awning window.

Looking to replace all the parts in my home. They all bend and are 18 inches long and bend in the middle. Any help you can give would be greatly appreciated. Thank you!

Let me know if I have that parts available

brand fenestra detroit windows looking replacement manuel cranks