Viewing all customer Discussions for:

Door & Window

Metal connectors are broken. Looking to replace the connectors. I'd even replace the wood handle if you have it or similar.

Please narrow down my search for these two parts i need 10 of each3" length7/8 width

Hello, I am looking for replacement hardware for these Swisco Truth items. Please advise availability and pricing. Need between 2-5. Thank you!

Hello, I am a home owner and have a piece that I am trying to either identify this or find something that will work. We had new windows installed a few years ago and can not for the life of me find this style of screen clip. Can you point me in the right direction? There is not a serial number or ma ... (cont.)

Requesting part identification for sash lock of a Slocum vinyl replacement window

This is part that keeps channel tension spring in place

Can you please confirm the appropriate counter balance to replace these? length 28" qty - 4

Looking to buy replacement balances for a non tilt window that has a worn balance

My son broke the handle on the window locking mechanism when he left it open on a bitter cold night. I need to replace it, but can't find the part number. The casement window is made by Truth Hardware. The only number I see is on the arm, #30744.

Looking for this window part on top

Aloha. I just need to replace the outside handle that goes to my screen door. "JURALCO" and "322" are stampled on the strike plate. I note your part no 40-049 might work, but I only need the outside handle. Do you sell the handles separately? Ideally, the replacement handle will match the one i ... (cont.)

Need all parts to open window. Only number is 31858 on lever

Looking to find this part that operates the window. The metal portion is 6.5 inches long and 5/8 8nch wide. Can't find brand on window, but was installed when house was built in 1976 in Florida. It's a 4 section crank handle awning style that is 4 feet wide and about 5 feet tall. Thanks for any help ... (cont.)

1972 Champions mobile home , with this style side crank out window , I have tried some jalouse brand cranks . But they don't close the widow all the way tight . They look the same but the widow stays open a inch ( the gear on the crank stops dead ) I don't want keep buying trial and error to see if ... (cont.)

I have a PGT 24" x 60" single hung window that I need balancer replacement parts for. The bottom moving window part is 24" x 30". It looks like the balancers on each side have a number 7 on them. And it appears that maybe there are two coil springs on each side. Please let me know what I need fo ... (cont.)

Here is my window balance. I want to replace it and which part should I purchase

Found no names or numbers on hardware. 2 3/8" spacing for the mounting screw holes

Hello I need a replacement part thats in the pic attached. Let me know if i can get this

Looking for the interlock plates that hold the door snug as it is closed. There's one on each side of the door. It's the plate with 2 screws holding them in place and goes around the locking mechanism.

I need a replacement handle for my sliding screen door. The doors are MI Window series HM390 code MTL - 10 sliding patio doors. Can you provide me with the part number and how to order this pleas?