Viewing all customer Discussions for:

Door & Window

Hey looking to replace 2 broken operators I have. I cannot be certain of the type of window, perhaps Marvin. Any assistance would be appreciated!

Help ID part for replacement of broken spring. Left Side. PAT 5.353.548 Double hung window. Also information on replacement of the spring.

Looking for one hinge that's 5 1/2 inches long that is connected to the bottom of the window and crank. Single metal piece

I can't identify the window manufacturer. This part came with the original window that was installed in 2002

I have a sliding patio door that is 37x94". One of the screen rollers that was worn out came off, and I tried to find another wheel. I found one at Ace hardware, but it was just a little large. In the process of trying to fix the problem; I unscrewed the screw on the side in attempt to take the whe ... (cont.)

I'm looking for about a 6 foot glazing bead in sand color for Jel Wen window.

I have a Pozzi casement window with two operating sashes. The right hand operator has come out of its mechanism. Would you have a replacement operator? Thanks in advance.

Holes on window are already drilled. I need replacements for plastic locks that have broken. 1. Distance between holes = 2 1/16 (2.0625) 2. Distance between hole and side that locks is 3/4 inch (.75 inch) 3. Width on long side (side with sweep lock) is 2 9/16 inch (2.56 inch) 4. Width on narrow side ... (cont.)

Hi I'm have a double hung tilt latch window made by IWC and I'm looking for replacement balancers. Any ideas?

Need parts for left and right windows. Turn handle is stripped out and can't open or close.

Hello In the attached pdf I have detailed the issue. I am looking to replace 24 exterior finger style handle with a square cup style handle, thus making it easier to open and close heavy hurricane impact resistant doors. The challenge is that the center hole to hole measurement of the exterior hand ... (cont.)

Milgard Window 25.5 B.S.I PK

Hello, I am looking for a replacement latch/lock for my Crestline 723 series casement window installed in 2007.

This is the style of spring that I need One sash weight is 14 pounds and the other is 21 pounds can you tell me which spring I need to order ? Thank you

I am in the process of replacing the Weather Strip on my Front door, which is Metal door. Attached is the picture of the old weather strip. Could you please let us know what is a suitable product? I was not sure if the Weather Strip 58-002 is the suitable or something else? A Kumar ... (cont.)

left handle 40254 1 20544-30336 304 lh right handle40254 2 30637-20544 30472 rh

the slider door handle has a broken barrel for the retaining screw.

Does the 40-049 lock set only come in brass?

We need new sliding window rollers for our windows. Part # pr20264

Looking to replace this broken peice on Western Window screen door.