Viewing all customer Discussions for:

Door & Window

Crank slips and won't seat back into the operator. Not sure which part is need of replacement (or the whole thing)?

I do not have markings on anything that I can identify on the window. It measures to be 1 1/4 x 9/16

I need 15 complete new crank mechanism as a complete set brand new.

My Larsen storm door is 30 years old. We keep th screen in all the time so the slides and latches have becom corroded.. I need to replace all Key corners for screen and glass windows plus the slide latches for the glass. I don't have a serial number for the door but am sending a pic. Can you advi ... (cont.)

Hello, I need assistance identifying parts for a window please. I have attached pictures for reference. Thank you!

The balance is stamped with "1720" and is 18" long.

So my current block and tackle window balance has failed. Saw that your site recommends a newer system. My current balance is a CMC (Caldwell) 27", 5/8" depth, with winged plastic guides. Window sash weight is 19.6 pounds.

You have a few pictures of the crank that could be the same as the one I have. Can you tell from these pictures which one I need?My name is Kitty. Thanks in advance.

I do not know any names or part #. I do not know where to get this I hope you can help.

I bought this door used and the handle recently broke ! I don't have any part number or brand of door, I'm hoping you guys are as good as everybody says you are!

I need a replacement locket for my door. See pic

Iam looking to replace this part on my window.

Would like to replace 2 of these window cranks

I need 2 rollers for my old aluminum patio door. Please help me find the correct replacement

I am looking for replacement Muntins and "glazing trim" for a Nuair 900 series window. Any chance you may have these parts available?

Order part

twin seal single hung ama/mwwda 101/i.s.2-97 H-R25-46x77 My old window does not slide up/down. The crossbow spring plastic hooks are broken and need to be replaced. Could you please help me with the replacement part or check if the same part is available?

Which sash guide do I need for replacement,

Hello, I need the parts posted below (mortise lock and keeper) as well as the sliding door handle. PAT # 6.264.252 PAT # 5.820.170 Looks like dimensions are 10 inches and 11 inches. Would appreciate your help prior to ordering.

Need to match the glazing bead