Viewing all customer Discussions for:

Door & Window

Tilt latch on both sides of the window are broken where the latch goes into the track. Missing the plastic caps that attach for the user to operate the latch.

Need a replacement target catch for a sliding glass for handle lock . I can send pictures if there is a platform to upload the images

No numbers or markings found. Replacements could not be found from local hardware stores.

31 2 Dr Caldwell

Need a replacement window. Window damaged in a storm then found out the frame is rotted.

Need to replace this part. Measures 33". Window slides up and down. Non tilt

Hello, I need to replace the Mortise lock in my sliding door. The two markings on it display:PAT #:6.264.252PAT #:5.820.170

Looking for two strikers for Showcase brand vinyl windows windows. It is the part the latch curls into when you lock the window shut.

Glass sliding door seal. Width = 0.28" or 9/32" Hight about 0.28" to 0.30" Door heigh: 78"

The pins have come out of one of the cranks, so I cannot open the window. Will the 39-375 and 39-376 be the replacements? Is this an easy part to replace?

Mirrored closet door rollers c1986. I can remove the door to try to get better pictures of the roller if necessary. Thank you! Mark

Looking to get 2 top tilt corner peices I think it is this part number. https://www.swisco.com/3-16-tilt-corner/pd/Replacement-Top-Tilts-for-Storm-Panels/95-250 Then I also need 2 corner peices that don't have the tilt tab and one of the locking slide mechanisms. Any help would be great. ... (cont.)

Door is hard to open and close.

Looking to replace all of the parts of two casement windows because they are rusted.

I'm starting to have trouble with the key on the outside of this storm door. What part do I need to replace it? Just a spindle or the inner and outside pieces? They clearly were mixed and matched by the previous owner. I need to have a lock/key on this door Thank you!

Hello! I am repairing 60 year old aluminum windows and need 4 new spiral balance shoes. The bottom sash clips seem to be okay. I don't see anything here that come close to this design so hoping you can help me out. Many thanks!

Looking for replacements. Looks like they are easily removable/replaceable. About 3.5 inches long.

Hello,Looking to replace the part that I use to ensure that the window stays open. A part broke off and is stuck inside the usual opening, preventing this. Attached are pictures of each side - the good side and the bad side. My handyman suggested I send these pictures to you to order replacement p ... (cont.)

Hello, I believe I may have Windsor windows. The spring on several windows seems to be displaced from its proper location. Please provide the part number and hopefully instructions on how to replace the springs. Thanks

Hello, I am looking to replace the crank arm on my bathroom awning style window. The current mechanism was made by Truth and the ID#'s stamped on the arms are 41013 and 41016. Your website shows an Encore - sill mount operator which appears may fit and I am looking to see if you can verify this to ... (cont.)