Viewing all customer Discussions for:

Door & Window

I am repairing two 60 year old aluminum Patio doors on my home. It is a mid century home and we want to keep the doors. The steel ball bearing rollers are 1.25 inches in Diameter. The center hole is 1/4 inch diameter. The roller is 7/16 wide, with the groove approximately 5/16 inch wide, inside ... (cont.)

Hi, Do you carry this part? If so, please let me know your part number and I'll place the order. Thank You!

Need part number price n how much to ship to s fl n how long to get

This is a balance on a vinyl replacement window. Do you need any more dimensions? Steve

I have had a hard time finding replacements for the part (circled) in the attached photos (I don't know what it's called!). Can you help? Thanks in advance.

Here are some measurements that I took. Hopefully these make some sense as I have not worked with windows before. I wish I had the old balances so that I could measure them but the previous owner apparently threw them out :-(Length of channel in the moving part of the window: 16 3/4"Depth of channel ... (cont.)

I need the spring loaded piece that fits on each side of the window

1/2 thickness 26 inches metal part or 27 inches including plastic It is non tilt window.

Tilt out window metal guide good one shown other side corroded and broke. I need the little metal guide that slides into the spring balance.

My part has "28E" engraved on the outside of the channel. I believe this is the 765 but your description says the top is a screw in type clip. Mine has an actual clip that is installed into a hole in the window frame. I have several that I need to replace that have come detached from the window. ... (cont.)

Metal is 29" (not including top and bottom clips) 2830 cj lp engraved on metal. I would like to order 8 of these. Thank you!

MARKINGS INSIDE ARE 677, 12, 9, PAT PENDI HOPE THIS HELPSTHANK YOU MIKE

Hello Swisco:I saw the video on 'How to Identify Your Channel Balances' on your website.I would like some help finding the correct Channel Balances for a non-tilt window.The measurement length is 33 inches without the attachments.I did not see any stamps or other markings on the old channel balances ... (cont.)

Hello again, See attached photos of our latest failed operator. The unit is stamped with "Truth" and the number 41012. This is on a thru the sill mounting. I'd would like the white cover and a new gasket if that doesn't come with the crank assembly. Thanks you.

I need this part.

I am looking for a replacement handle for a Larson Storm Door REG#69107032M 2120211009

Looks like a sash and lock, broken, no labels or names

bottom guide for stanley bypass mirror closet door

I have kitchen cabinets that are about 23 years old and I would like to replace the hinges with "slow close" type. Do you have something that would fit? Thank you Diane

This is; Right side tilt latch from my plastic window frame. All measurements on pictures are in millimeters. This part doesn't have any stamps or numbers on it. Thx.