Viewing all customer Discussions for:

Door & Window

channel length 28" stamped "(11/2) unique 27-E-50" building was built in early 2000s I would be interested in purchasing a few dozen of these.

Hello I need help figuring out which latch I can use to replace the right side latch of my window. Latch seen in picture is the left side. I need the right side.

I need to purchase 7 BSI window lifts.

I am looking to replace two rollers on a large mirrored sliding door. The manufacturer was Buchmin Industries which I understand is no longer in business. The groove of the nylon roller is 5/16". Diameter of the roller is about 1/14" Length of housing assembly is 1 7/8' Height is 1 1/4". ... (cont.)

Looking for a replacement parts

Kindly advise which balancer I need. Please find the photos showing the window label and stamp on the balancer. The measurement of the existing balancer is the length of the metal channel. Thanks

I need 20 PCS at 48'' in White

Attached you will find a picture of the parts i would need & the finish needed in. Is this something you can help me out with or would you need more info?

Hi there, I am a homeowner and I am looking for a 71" replacement sliding glass door rail

The channel balances in the window are different, which from what i read should not be the case. Window is 14 pounds in weight. Balances are both 1/2" wide. Both are stamped 25 3. Both have the same top hardware. Channel 1 has pulley assembly built into bottom hardware is 25 5/8" long. Channel 2 h ... (cont.)

Hi,I am looking for a compatible replacement plastic glazing for Anderson number 30845. Is this something that you would have?Thanks,Lou

The track has a number 1640Z the rail is 17" long I need 2

16 2 and I need two please. Hope my pics attached.

I have a Marvin window that is missing one the two cover for the locking mechanism on the window. I believe it is from Truth Hardware, part #93198. Can you help me with this? Thanks

Looking for a latch for this window, unsure of make or name? All of them busted out.

I did not find any marks on the door. Just purchased this house. Your help is much appreciated identifying the door crank/lock.

Hello: I am in need of this plastic part that is attached to the window and the steel track as when you move the window up and down to keep it stable. Would appreciate, if in stock to purchase 4 of these. Please advise and thank you so much for your assistance.

I am working on a project with aluminum windows where the glazing bead has become brittle and broke upon removal for installation of new glass. The glazing bead has an L shape with a lip on backside that would snap into window frame. Dimensions are approximately 5/8" X 1/8". Any help would be apprec ... (cont.)

Metal channel is 32 inches Markings read 31-5 CM5 CMC

Posting on the handle is showing Ideal DX1 and under that is is showing D-423-320. Storm door is about 25 years old