Viewing all customer Discussions for:

Door & Window

The Snap-in Glazing on my window fell off and I am looking for a replacement.

Do you have these in stock?

21 9 BX CMC 11 Pulley broke and I don't have a picture of the hook.

I am needing the bottom finger latches for the removable Storm Windows.The window locking latch indicates "Ultra Supreme by Anderson"Note : I am only needing the spring loaded "corners" that actually hold the aluminum storm window frame together. If you look at the picture with the pencil pointing t ... (cont.)

length of the metal channel is 20 inches. Stamp is 20 3 Not sure about the window manufactured. The window is 13 pounds. I need 2 balances (one for each side)

the door is drafty now. I have an 8 foot patio sliding door from the 1980s.

Hi - It's 28'' long + 5/8'' wide "wings" on both top and bottom guides

Hi looking for this specific item tried hardware store all are a little different then mine. The extender that comes out is bent inward about 1.5 in from where it connects to the crank spindle arm. If you can help me find this part I would greatly appreciate it.

Channel measurement is 19 inches.

Looking for window latches for my jeld wen windows need 20lefts and 20 rights Also, need these pins? 20 of them will be fine. They have the number 2311 on them

the metal channel is 25" long. stamp on guide is 2430 BB. I want to replace right and left if there is a difference. Thanks!

Need help identifying the correct replacement. The body is 30" L 1/2" W.

Trying to figure out which coil balance pieces to order. The only marking I see on the coil itself is "406" Can you suggest some parts to try? I have a bunch of these that have failed on my house, these were installed in about 2005?simonton windows - various sizes. Appreciate the the help! ... (cont.)

Hi I need replacement channel balances for a few windows. I attached photos. Note that the code that's printed is: 34 3 IV CMC 7 The length of the balance is: 33 inches.

Do you have a new part for this screen door knot ?

Unknown window manufacturer. Measured lock shoe thickness is 23/64" (3/8). Width is 15/16". Think part # 15-212 should work. Are black cams all the same or do I need to measure the cam? Thank you

hi The dual coil springs have one #4.5 35" and one #5.5 35" coil springs (232208 is printed on #4.5 coil). The #5.5 35" coil spring was broken into halves. the sash weights about 17.6 lbs. which part should I order to replace the broken #5.5 coil spring?

Hi I don't know the name of windows manufacturer or parts number. Windows are original house is 23 years old. I would appreciate if you can help. Dariusz

Please identify my old Chanel balance for ordering new balance ,thank you .

Weather seal old and cracked. Slides into a groove on the bottom of the window. No part numbers or manufacturer info visible.