Viewing all customer Discussions for:

Door & Window

I'm looking to replace a folding window crank, which has problems with the tension pin coming out of the crank. It's white and has a 2108 model number. Based on my research, it appears to be a 5/16". I've included several pictures that will hopefully elucidate which replacement part is required. ... (cont.)

Dear Swisco, We have Integrity windows by Marvin, with Truth Hardware operating mechanisms. The post for the window crank has 11/32

Hello, I am looking for replacement rollers for an old V.E. Anderson (not Andersen) aluminum slider.

The channel balance I need to replace is stamped 28C. Which stamp option would that correspond too? Thank you, Jason

Can you identify which replacement part I need to replace a channel balance stamped (01/3) UNIQUE 27-C-30?

Hi there, looking for a latch like this. Flat on the bottom, no corner vertical piece. Do you carry this?

Attached are the pictures of the operator I need. Appears to be same as your 39-258 EXCEPT I measure 4 9/16" not 4 1/2" and arm is 2 5/8" which it says it is, but then it shows 2 1/2" in diagram, and all of the screw holes on mine are flat on the underside, but your -258 appears to protrude a fract ... (cont.)

I am looking for a replacement parts for my Executive Mirror Bifold Closet doors. The bottom pin was damaged (looks like the disc broke on the spring loaded arm and now the bottom track is all roughed up and needs replacement as well. Any assistance would be greatly appreciated.

Hi, I have an acorn sliding patio door and need two new wheels. I'm attaching photos. Can you help please?

My current cranks are Pellas stamped with 7138 and x429. I went to my local hardware store and purchased t cranks that don't work. Do you sell T cranks that will fit my windows?

These plastic clips clip into slots on the aluminum frame (4 per window), and keep the metal sash from riding directly on the window frame. They are made of a black ABS hard plastic. They are no stamps or labels on the windows to indicate who the manufacturer is... I thought of maybe buying a strip ... (cont.)

Hi please see attached photos. 23 inch x 1/2 inch Please contact me to make sure I ordered the right part number. The channel length is 23 inches long and the width 1/2 inch wide. Thanks, Polly

In the attached pictures the spring is 14 inches, the metal channel is 28 inches x 5/8,x 1/2 Is it possible to buy the whole assembly? the metal piece is fine but we need the plastic ends on both sides, and the metal piece at the end of the pulley string string. is broken ( the side away from the ... (cont.)

Hi, On 30.5 series 850 crossbow balance, does it come with a plastic clip instead of metal at the top? The one I have is plastic and it doesn't require any screw, but have a hole for a plastic clip. And the hole is little bigger than the screw size. If replace with metal one you have, and I need to ... (cont.)

Hi , I 'm need this part ; 2 ,3/4long , and 1,7/16 from the head to the hole , I'm needing 6 .

I want to confirm the correct part number to order vinyl part is 5/16" tall x 1/2" wide including the small tab curved edge has no tab

I am at a loss for this window hardware. My parent's house was build by a contractor that used "industrial" parts that are so irregular that it is often hard to find parts. It was build in the 60's. This being a prime example of tough finds. I am looking for any help...hope you're up for a chall ... (cont.)

Removed an Anderson sash balance marked with: L6 10#31 6-78. Two photos are attached. What replacement balance boxes do I need? Thanks, Fred

Hi there I'm trying to get replacement part for my double hung tilt out windows. The windows came with the house so I have idea what brand they are. I need the bottom window pivot bars. The broken one that I have in the picture says 9862. The attached photos show the measurements. It was the best I ... (cont.)

need to replace this balance and the parts