Viewing all customer Discussions for:

Door & Window

this plastic part is at the top of the window where the balancer should catch on. The broken one has the top of the piece broken off and the balancer stays up. What is it called?

The lever has a broken tooth on it so will need replacement. When I took off the handle, all the parts fell apart - all the 82-107 parts like washer, copper key, retainer cap, and couldn't tell if any others fell inside the door. Will this kit fit all door thickness and do the trick, I don't have m ... (cont.)

Hi - looking for this ROW lh casement window operator. can you help me out?

I have Milestone Impact single glazed windows. The beading is similar to your example but not 1/2" thick. It is more like 9/32" across and 13/32" high. Is such beading available?

need help identifying and finding replacements.

Hello I'm looking for these parts, i need 4, I hope you can help me, thanks!

need replacement parts

Need window parts identified so I can order parts. Sending more pics in 2nd post....

Hi there, Please advise good match.

This is for a 40 year old slider door. The current lock is missing the bar to latch onto. The distance from the mounting bolts is 6 5/8 inches. I need a replacement for the lock, handle and latch.

I'm a little confused on which 30" Series 380 Channel Balance to use, 2940 or 2950. My window weigHits 27 lb. Please advise. Thank you for your time.

Hello, My current channel balance bent. I can read " 33 5 BSI RN" printed on the metal, but I am not sure it is 33.5 or 33 5, since the channel bent exactly between those two values. Is there a standard size of "33.5" ? Or is the 5 a value for another attribute of the channel balance? ... (cont.)

I'm looking to replace a folding window crank, which has problems with the tension pin coming out of the crank. It's white and has a 2108 model number. Based on my research, it appears to be a 5/16". I've included several pictures that will hopefully elucidate which replacement part is required. ... (cont.)

Dear Swisco, We have Integrity windows by Marvin, with Truth Hardware operating mechanisms. The post for the window crank has 11/32

Hello, I am looking for replacement rollers for an old V.E. Anderson (not Andersen) aluminum slider.

The channel balance I need to replace is stamped 28C. Which stamp option would that correspond too? Thank you, Jason

Can you identify which replacement part I need to replace a channel balance stamped (01/3) UNIQUE 27-C-30?

Hi there, looking for a latch like this. Flat on the bottom, no corner vertical piece. Do you carry this?

Attached are the pictures of the operator I need. Appears to be same as your 39-258 EXCEPT I measure 4 9/16" not 4 1/2" and arm is 2 5/8" which it says it is, but then it shows 2 1/2" in diagram, and all of the screw holes on mine are flat on the underside, but your -258 appears to protrude a fract ... (cont.)

I am looking for a replacement parts for my Executive Mirror Bifold Closet doors. The bottom pin was damaged (looks like the disc broke on the spring loaded arm and now the bottom track is all roughed up and needs replacement as well. Any assistance would be greatly appreciated.