Viewing all customer Discussions for:

Door & Window

Do the metal takeout clips go in as pictured. Or is the picture upside down.

I'm looking for a source to purchase these clips.

the spring loaded plastic things keep breaking looking for replacement pieces. Let me know if this looks like something you have.

Do you carry this operator?

I need awning window parts for a Caradco window. The length of the brass armature closed is 21.5 inches. The number stamped on the brass arm is 30086. The number stamped on the piece that houses the the gears and holds the crank is 40245. The paint color is Caradco Bronze.

As per your request attached you will find the pictures of the balancer for a Traco window. The window measure 53w x 63h, impact. Because of the size and the impact glass it weights a ton, that is why you will see double springs inside the balancer. I need four of the balancers. Please let me know ... (cont.)

We are looking for a couple of these handles as replacement. These windows are from the mid 80s and could be WeatherVane Wood Windows. Can you help?

I'm trying to locate plastic window glazing and would like to know if you have the part. I have atached an image with dimensions. I appreciate any assistance thank you very much. Joey

This is for a sliding closet door top roller.

Hello, I included 2 pictures of two different window in my home that have damaged tilt locks. I would like to purchase the replacement parts. Do you have directions on how to install?

Hi I need to replace the channels on several windows in an older home and need some assistance in what to order. I need to replace both channels for: 7 Windows that are stamped 28c 3 Windows that are stamped 28b 22 - top sash guides 34 take out clips I'm including pictures of what I am repla ... (cont.)

Hello, I've attached some pictures of a Andersen sliding door handle I believe that is from the 400 Series Frenchwood Gliding Door series, that I need a part for. Its more than likely from "1987" as thats when the house was built. There is a screw that fell out at the top and it goes through the ... (cont.)

I have several balance replacements I'd like to order, but I don't have the balance for some windows. The one I do have is a 29 inch and it has 2900 BSI LD stamped on it. What does this tell me with regard to the right fit? How can I determine the others fit? Lastly, the bottom piece which I don ... (cont.)

I believe I need the S351-29 but the markings on the broken one don't match the ones you have listed. 28 2

I have PGT windows that have spiral balances (24" x 5/8" w/blue tip. We are about 100 yards from the ocean and the ends of the spiral balances are rotted off. Some of the aluminum frame is also gone so there is no place for the balance crows foot to connect to. Is there a part that will screw to ... (cont.)

I am attempting to repair a lower sash on a prism window. If you raise the sash there is nothing that prevents the bottom of the sash from coming out of the tracks and swinging freely. I don't know if it is a side balance or some sort of guide.

I just ordered this product - 38-036. There are no threads inside the screw hole so the screws do not hold in the product. How are we supposed to install this so it stays put?

Cannot determine which balances I need. There are two identical ones. Some numbers: BP25 12#27 5-86 11600-17 See attached pictures. Thanks! Mike

Hello, I'm looking for a Marvin screen door striker, part # 05570438. I found it on Marvin's web-site, identified as Obsolete. Any help you can provide would be much appreciated.

Today I find that I need a replacement for our old sliding glass patio door handle. The numbers on the handle are from Allen-Steven Corp RD1965. Hold center to hold center measures 4 inches. Thanks, Bob