Viewing all customer Discussions for:

Door & Window

Please are you able to assist with identifying top and bottom part. The channel is 29 inches and 5/8 deep it has a stamp on Channel of 28c

This one is from the top of the screen door. The two on the bottom are rusted out. The metal tab is 2" long, screws into the top and bottom runner of the door, the two bent sections of the tab are 1/2" each. Need other details?

The metal channel is 1/2" wide, 1/2" deep and 20" long, (without fittings). this is for a non-tilt window. The back is marked 19 4 BO, (or B0), CALDWELL.

My bedroom closet has two doors that open from the middle. The hardware that keeps them closed (on top) no longer functions (broken). On top of the hollow door was a ball type assembly with a spring under the ball to secure the door.The ball has come out and no longer will supply enough preasure to ... (cont.)

I am not sure of what type of windows but have multiple windows with the same problem. The top sash guides all BREAK making the channel balances not work correctly. I have taken 3 windows out and there are also 3 channel balances that seem to be not working as well since the pulleys or rope are all ... (cont.)

We have several cranks on our windows that do not work. Some of them you can open the window but when you try to close it, the entire piece of hardware comes out. I have included several pictures so you can see what they look like. I also took a picture from the outside (outdoors) of the window w ... (cont.)

The handle that activates the lock to lock and unlock broke and I need to find a replacement handle that will work with this lock. Thank you

I searched and found your S900-30 part which closely matches the 3/8 inch tubular balances I have in Savannah GA. My balances are inside a white plastic sheath, but I don't see the availability of ones with a sheath. I have no idea as to the weight of the tilting lower sash of these single hung ... (cont.)

I believe I have a 1970's style aluminum patio sliding doors. The handle that locks the door has broken off. The tenant already took it off to try to replace it. Attached is an image of one of the handle pieces. I want to replace the locking mechanism and handles. I don't know the name of the ha ... (cont.)

Need to replace a screen/storm door handle. Want one that has an outside keyed lock, with at least 2 keys, and must swing inwards, and be easy to install.

Hi there we spoke on the phone and you wanted see photos .I have taken 5 for you

As you can see, the lock is missing. When it first broke, it ended up falling inside the sliding door. I believe this patio door is the Silverline 5500/5700 series but I am not 100% sure. I am looking for a new lock ,I have been using a 2x4 on the bottom of the door to secure it. Can you h ... (cont.)

Hello, I've recently moved into a new home and we have a street facing patio door which will not lock securely. The handle is apparently an incorrect replacement and some of the parts are damaged. The rear plate which the handle bolts onto has recessed hand pulls and the dimensions are 8 7/16 ... (cont.)

Looking for channel balance #on frame 29DS 38. It is 30in long. Window SH-7500 Dubble pane glass. Need a part # and where I can order them.

A number of our vinyl glazing beads for the Subject windows have cracked. Where can I find matching replacement glazing beads - four photos are attached.

Nami Code E-076-1 Spec DH-R30/35/45 Series: 350 MST: 4661/31054 Left side latch needed

Hi. I am looking for Casement hardware for a Customer of mine. I will need to upgrade to Stainless steel. The hardware takes a beating here in Hawaii.

Tilting window- 34 " sash no identifying numbers . Two windows will not stay up

Can you give the width dimentions?

hi this bracket i am trying to find is on a patio door with two center open doors and two one the ends that are fixed. I need to replace three of the brackets on the fixed doors and that is the image I sent. Please let me know if you have that part or can recommend something? Thanks Michael ... (cont.)