Viewing all customer Discussions for:

Door & Window

The length approx 3 1/2 inches and between holes approx 2" Bob

I am looking to find the glazing and other parts for my 1993 Viking Aluminum windows. Is it possible to replace pieces of the window frame, one of the screws was stripped out? I was able to get it to hold with a longer screw but am not sure if this is when I should just replace the window? ... (cont.)

I need to order a channel balance replacement based on the attached pictures..

Please indicate if replacement for attached balance "26 5 EV CMC 7"

1 3/16 overall width (includes catch, 1 7/8 center of hole to center of hole, 1 1/4 high

1 1/4 center of hole to center of hole, 1 7/8 to 1/15/16 wide, 1/4 wide

1 3/4 height (plastic, 1 1/4 wide, 1/2 deep, coil 1/2

apx 1 7/8 to 1 15/16 wide, 1 1/4 center of hole to center of hole, 1/4 wide, white

The latch is Broken on this handle,Ever guard storm door Serial B No 19265 do you have a replacement for it or other handle that can accommodate this storm window. Thank you

I have Anderson High Performance windows IGCC CBA 1989 and a lock or latch broke. They do not tilt, have to slide them up and down to clean. The lock I need is about 2 1/2 inches long; dark grey color. Do you sell something like that ?

I need a set of two sash balances with top and bottom plastic pieces as in the pictures. It's 1/2" wide channel with marking of "26 5 FW CMC 11" It's 26 inches long.

unable to find markings

Looking for roller assembly for sliding glass door. see pic attached. There are no descriptions, numbers, or markings found on my existing hardware. Also looking for a rail topper for the patio glass sliding door. The existing rail is 9/16 in height Thanks.

Not sure what model it is. One spring has a 3 and one has a 4. Window weighs about 14 pounds. I just bought this house on dec 5th 2013 and have 2 windows that won't work properly. Any help is greatly appreciated.

I need to replace some of our top mounted window latches. I examined your top mounted window latches products but I am having difficulties identifying a replacement as I don't seem to be able match the with dimensions for the screws for my part. The with between the center of the two screws for ... (cont.)

I wanted to know if you can get the subject operators as I have (4) that I would like to purchase. I saw a photo of this operator on your website but the dimensions were not exact and I will try to describe the dimensions here. center to center of the mounting holes(long dimension) 5 5/16 ... (cont.)

It appears that you have the wheel but not the wheel and assembly from the parts that I saw online. A.Geo Diack On top.

The aluminum sliding patio glass door is about 43 years old . Four of the pictures attached are of a good handle and lock assembly, identical to the broken one, on another door. The 5 th picture is of the broken handle. The distance vertical between the two screw holes on the broken handle is 3 1 ... (cont.)

PAT PENDING. PXIND.INC

My windows were replaced in the 1990's by a handy man. I can't contact him. I think the company was located in PA. I need help. I have several broken tilt latches. Right and left. Two windows I can't even open because they are broken. The number on the part that slides with the spring is 535B. I wou ... (cont.)