Viewing all customer Discussions for:

Door & Window

Hello , i am trying to find this latch , it is a side window for French doors , I need 4 of them in beige.

Window doesn't stay open. Only thing different is missing small piece on both sides

I have an account with you guys and order window stops from you, I cannot find a replacement for the attached. Could you try and match? Thanks!

It’s stamped 20 and a constant tension balance

6 pound coil balance

My channel balance is stamped 2630, total length including the metal channel and plastic end attachments is 28". Length of metal channel by itself is 27". Metal channel is 1/2" wide and 5/8" deep. What part do I order?

the tiny white plastic piece has broken so latch will not stay shut. Piece that inserts into window frame is 3" long by 9/16" wide.

Replacement handle needed for screen door on a Weathershield 1977 sliding screen door. Black plastic with white slide. One side is riveted on the inside of the frame. Square slide on channel to lock the sliding door. Measurements are 2" wide by 4 1/4" high and rouchly 3/8 inch thick at the thcke ... (cont.)

I have no clue what this are do you guys have these by chance

We are looking for the lock and latch for this style window lock. If it helps the windows were purchased through Moss.

Hello, I am looking for the correct tilt window latches for Lockheed windows that were installed in 2006. Need to purchase 24 of each side

Hi I'm looking to replace my large aluminium sliding patio door rollers. I live on the coast and although the housing and wheels hold up, the bearings or axels rust and seize. The diameter of wheels are 25mm. The length of unit is 110mm by 20mm wide and 20mm deep/high

The coils are broke on each side of my American Standard Window. I have attached a picture of the model and of the parts. Please help me find the parts and send a video of "how to" replace them. Robin

Hi, I’m looking to refresh my windows as half of them are falling out. Are you able to help me out get new balancers and window hardware required ? I just want to replace the full thing and maybe even change the “shoes” if there is any new system. The windows just move up and do ... (cont.)

Not sure about color tip

Looking for a sash pivot bar to match. I have pics

I am simply trying to find replacement parts for my BFS non-tilt windows

Looking for paret #'s to replace the left (pictured) and right window crank mechanisms. Thank you.

I just received 4 new balancers the other day and went to the customers house to install and the window would not catch them. I noticed that this piece is missing on mostn of the windows. Is it available? These are single pane aluminum windows and house was built around 2000 ish. ... (cont.)

Hi, I believe I need 39–348 based on the attached photos and the width of 24 inches. Two of the screws lineup roughly 2 inches apart, but I can't see the other two screws because they may be hidden by the arms. Can you confirm that they are about 4 1/4 inches apart? It also appears that I need ... (cont.)