Viewing all customer Discussions for:

Door & Window

I'm sorry I don't really have much information about the glazing other than it's a 2010 house with original windows with white plastic casing. I'm happy to mail in a section for you to look at or take different pictures for you. I'm also happy to go with a different trim and I'll change it all but h ... (cont.)

This is a small plastic clip which fits on the aluminum edges of sliding Milgard windows that moves up and down in the (aluminum) channel. It seems that they are installed to reduce the friction of sliding and or to prevent wear on the painted aluminum. These clips are 0.44" tall x 0.37" wide and ... (cont.)

The length is 33 1/2 inches long The stamp is 33-61 lbs caldwell Lp-1 The tube color is gray The bearing on the end is yellow , The window has two balancers on each side with one carrier of each side. The bottom two pins are 1/2 inch in spacing. We need 4x balancers in total with two carriers, pl ... (cont.)

I purchased the crank operators which were the correct ones. Now I am looking for the hook or keeper in the lower corner. I am not sure what the are called or the window manufacturer. They work independently of the crank. When the window closes a pin makes contact them, then they hook on to the pin ... (cont.)

Hi, We have a customer who has channel balancers for a tilt window, and we are trying to find the best replacement. We’ve attempted to source the closest possible match on your website but haven’t had much luck finding something suitable. We have found product code S795-34 that seems lik ... (cont.)

please help identify this balance , will need twenty, more parts needed will send in seperate request, thanks for your help i think it might be S385-17 ??

No identifying numbers found. I need to find the part(s) required to repair this window. Thank you in advance for any assistance

Looking for this item here. 1" wide plastic retainer clips to help hold in my window screens

I just purchased 2 window balances 390 series 1810 they fit perfectly but only 1 side works i realized the right window guid was broken can you tell from these pictures what part number I need

Already out of window . looking for quantity of 8

Can you please identify the carriage and roller shown in the attached photo? I need two of them.

First time homeowner, just got keys to my first house. Looking to replace weather seals and the broken parts shown in the image.

I am looking for four window closures, two of each directions. I have had great luck with your company finding me what I need, so I hope you can help.

Looking for window crank operator replacements.

Hi, I don't have it disassembled. The window guy came by & took one of the locks. He can't find replacement and wants to replace with brand new windows which we cannot afford. I did see what looks like a match. But I thought I should ask you all v4 I order.

I need to replaces these window balances on most of my south facing windows.

Looking to purchase a replacement Operator for our casement window. Stamping on long arm is L30841 Stamping on shorter arm is 20810 Stamping on lowest arm is 6N89

2-1/16" long. tapers from 1-1/4" tall to 1" tall. 9/16" wide.1-1/4" dia metal Wheel. 1/4" axle.

Customer sent photos but does not know the manufacturer

I am in need of parts for alside windows series 3001. Need right and left coil balances. Pivot bars and tit latches. Susan