Viewing all customer Discussions for:

Door & Window

hello, I need to replace the internal worm gear inside Truth casement operator crank handle. (part of dual arm window, left arm 31254, right arm 31255) As shown in attached pictures: the worm screw worn out due to years of use. do you have this replacement part please? Thanks very much! ... (cont.)

Hello! Looking for a replacement Pivot Lock Shoe for these windows (you can see it has broke at the bottom in photo) and believe that #15-192 is the correct part. Balance springs are #406 and the measurements appear correct. Just wanted to make sure before ordering. Thanks!

I need an replacement operator kit for my Anderson awning window. I ordered the wrong part which was part # 39-839

The Weather Shield window balance strings broke. Need replacement balances, both sides. Markings on balance: H01 DB 27 Hd

Hello, I am looking for replacement coil balances for both top and bottom sash of this window. I also need the bottom pivot pins as they are missing. Thank you, Lynda

Need replacement parts

Hi I am looking for this pivot bar. Please advise. Thanks

I need the correct lock and mortise part for this jeldwen patio door handle .. it says its a amesbury hardware D466787

Crank wont engage and is slipping. Need new entire mechanism

Hello, what part would I order? Thank you

Need to idenyify and order 10 pieces of this balance. # stamp is 2840 then there is a CJ AJ after. balance is 29" long

I need a set of milgard channel balances. The metal channel measures 28" long and the width and depth is 1/2". I also need the related clips. Thank you

See attached- customer looking for 12' length in white for his storm window. Thank you Laurie

8501 8600

From end to crank plate is approximately 12 inches. Looking for Swisco replacement if possible.

I need two jam balance parts for my older (1985) Marvin double hung window

Window crank misc

2 tandem rollers. Rollers are 1-1/4" X 3/8". The body is 3-1/8" long X 3/4". The door was installed in 1978

Need assistance identifying exact parts needed.

I need 8 right and 8 left