Viewing all customer Discussions for:

Door & Window

Looking for the whole crank assembly with arm

Based on the photos, can you help me verify that the following part numbers: 39-032, 39-107, 39-114L are what is described in the photos? The existing crank has the following numbers: R30842,40471, 20810

30 year old, single hung, Pennco windows. The Tilt latch has broken (pictures 1 & 2). This is the left side of the window. Picture 3 shows the complete, right side latch. The length of the part is 2 7/8". Width 1 1/8". Thickness 1/4". Screw holes are on 2 1/8" centers. Do you have this o ... (cont.)

I need to order double hung window balance spring replacement . Window was made by American Craftsman series 8501 Thank you

Hi there,I has the window with S795-28 28B Channel Balances which were very old (more than 10 years). It works but moved slowly and heavily.I sprayed some lubricant oil. It made a loud noise such as the friction between spring and the string when I opened and closed the window. It still works wel ... (cont.)

would this work on Sash Controls Canton SD 2625? If not, which lock cylinder should I be buying? Thanks!

Channel is marked 32 4 HP CALDWELL. Metal alone is 33" (does not include plastic ends). Bottom is 1" and matches (15-005) Top matches (19-005) Window weight is 19.9 lbs (option 3230)

35" Long on the channel, 1/2 wide, 34 4 Caldwell KL 3 ea 14 4? (stamp is faded) Caldwell BM 3ea

Need both a left and right replacement coil and pivot shoe (see attached. Coil is approx. 1/2", and stamp is "J87" Shoe: 1-7/16" x 1-1/4" x 1/2"Coil Housing: 1-9/16" x 1-1/4" x 1/2"Sash: 15 lb.

I need to replace the handles to this sliding glass door. Looks like I need new handles and the center latching mechanism. No hardware store has this type tho. There's a sticker of the inside that reads SGD R20.96x96.I'm assuming the first is a model followed by a size. Hope it helps. ... (cont.)

Need replacement part

rod is 35 1/8 inch long and 1/2 inch wide

house was built 1981 I have 2-8ft doors , I need wheels for 4-panels.

Door is probably 15-20 years old. We thought it was Milgard, but may be Aegis. Handle broke on top. Only says made in New Zealand. Looked like you have a handle that would work, measurements appear to be correct.

Turn Knob to lock broken it's spins completely around

Our windows are single hung Anlin, the latches are marked with a "12" on each side. I need four of these to cover two windows. (PS the ones for my double hung window were perfect! What an improvment.) Thanks!

#2 on metal near bottom above the 2 small circles that stick out.

Need 2 door rollers - tandem 1 1/8 inch rollers 1 In wide at tabs Body 3 1/16 long frame 1 1-16 tallDan

Hello, I am trying to find a replacement track and operator for my casement window. From searching the part number on the track slider piece it looks like I need the "Roto Casement Track 39-542" but I have not been able to find the operator. Can you help me identify which one I need to order?Thanks, ... (cont.)

Metal channel is 1/2" x 19-5/16". Stamped 19 4. No manufacturer info available. I need 4 of these balancers