Viewing all customer Discussions for:

Door & Window

Need a left and a right. Tabs were broken off

There are no markings found on the part and I could not see anything on the actual window. It is the left side of a casement window and I need to order a new crank and handle if possible.

Need a replacement for a Pella outdoor sliding door. Roughly 1/2 inch base by 3/4 height

Metal coil has USA pat 5232208 and Omega #5.5 64" No info on white part Have different sized windows throughout the house.

I am looking to replace this crank on my Anderson window, the gears are worn and not longer work.

Hello, can you inform me what size spline is used for andersen 3052 screens?

Hi, I am looking for the attached TRUTH Split Arm Operator, can you help identify? Numbers found: Parts# Top 060299 01:13 MADE IN USA Parts# Arms 31876 41011 40448

Looking for balancer replacement. Balancer is marked "950". Window "glass only" measures ~29.1/2" wide X 25 1/2" high.

The carrier that keeps this casement window in the track is broken. The hardware arms are stamped TRUTH 30905 and 30744

Window lock is no longer working properly. Would like to replace three of them. Our latch measures 3in on one side and 2 3/4 in on the other side. From screw to screw it's 2 1/4. Would the window sash lock, 2 1/4 product code 90-180 work.

Looking to replace 2 balancers with these part numbers or something comparable. Thank you

Hi was hoping you could help. Those bars are. Slightly over 2 3/4 inches. Hope you can point me in the right direction. Thanks!!

I need six of the balance's uploaded and whatever clips, screws, etc. that are needed for install.Thank You,Brax

I have (3) SGD in a 2002 Manufactured home all with keyed locks. I would like to buy replacement locking handles. I added a pic of the information I wrote down from the SGD. Thank you for your help!

Anderson window.

Window pivot bar

Can you determine the lock replacement? screw holes are 2.5 on center. length of plate is 4.5. the latch will not stay up in locked position.

I know this is an old style operator and that the main body has changed.

The crank will o0en the windows but wont close thrm. Seems stripped inside. Do they make replacement parts for these windows anymore?

The metal appears to be 25 5/8" The stamp says 25DS BSI to 38 Windows are Milgard. Original to the house which was built in 2009