Viewing all customer Discussions for:

Closet

Hi I hope you can help me. I am looking for a Stanley closet slider GB232166. It is Grey and has a blue knob on the inside. The wheel is broken and not working properly.

I need a track for a Mirrored closet door

2 piece roller assembly. 9/16 wide, 1 1/4 roller #138-R on side

Which replacement part number do I need to replace this

Hey folks, I see you have something similar but hoping you can find this one for me. Thanks, Erik

Looking for this pivot pin assembly.

I am a quick learner, hoping you can help me replace these pieces, particularly the extruded boss. Your item 23-074 is very similar but mine is round where yours is "T" shaped. Than I s

I have metal boxes-fold closet doors. These doors have top and bottom metal pins that glide on the metal track. At the end of the pins are the plastic piece that help smooth glide and avoid metal-metal grinding noise. Would have such pieces? I need 20 pieces. Thanks.

Hello - I'm in need of replacement parts for a Take-A-Way brand metal bi-fold closet door. The manufacture date says 1969 if that helps, the parts appear to be original. I measured both bottom pins at 5-6/8th inches long, top pins at 4-6/8th inches long. Diameter of the tip of the top and bottom ... (cont.)

Need hinge& guide pin parts. I found the PIVOT BRACKETS, Product Code: 21-215, on your website but I also need 1 top hinge pin, 4 top guide pins & 4 bottom guide pins. All pins are approximately 5" long. No manufacturer's markings.

IMG 422 has a logo "LB" at top and "US PAT. 3041657" and under it "CAN. 673636 (1963) at bottom. Around adjustment slot: "To Lower Door" with clockwise arrow. Thanks!

I am looking to purchase 4 of the wheels shown above in the picture. Can you tell me if you have them. Thank you so much for your help. I am so glad I found this website Thank you Gina

Hello im trying to replace the attached hardware for my building. ACME brand.

Goes on bottom of door in corner and fits in track to support glass door

I need one of these.

Need replacement rollers for house built 1972 for hollow closet doors. Would yours work. My roller in photo

Hello. I need four each of the items pictured. Rollers on the floor and just guides on top. The top are not wheels, but rectangular rubber pieces. What happened is one of the rollers no longer turns and I lost one of the guides on top so I figured I'd just replace them all

Looking for 6 such parts

The roller bracket is 2 mm wide. The roller itself is about 1 mm in diameter. The bracket is L-shaped so that the roller sits on the frame and the bracket goes behind the frame and screws into the 5/8 inch frame. I need two of these replacement rollers for the second drawer. Can you help me?Thanks ... (cont.)

I am attaching a picture of a complete bottom roller assembly for one of our mirror closet doors and also an empty bracket from which the roller assembly is missing. Can you tell from these two photos what part(s) I would need or if this is indeed one of yours. Also, if this is the part, can you ide ... (cont.)