Viewing all customer Discussions for:

Closet

Can these be used to hang an aluminum patio door. Too much dirt for bottom rollers.

I have several Monarch B-G Mirrored Bifold Doors. One of the adhesive-applied door pulls, part #28441, has come off of the door. Are there replacements available?

Looking for this piece

I would like to replace the hinges for these accordion doors. If possible, I would need the codes for 1. 7 X Bottom jpeg 2. 7 X Top jpeg 3. 14 X Top and Bottom jpeg Thank you

Contractor threw away lower track when replacing floors. It is 5' long, 3" wide, black/oil rubbed bronze. Doors are 1" with center rollers. Doors sit 3/4" apart when in position. Was manufactured by Charmac, no longer in business. Do you have any suggestions?

Lookin to replace a 48" track and rollers

Do you have a bottom roller replacement part for picture. Top C to C horizontal holes = 2.5". Side C to C vertical holes 2.75". The roller diameter is 1 9/16"

Looking for a replacement for broken top rollers for closet bypass doors.

Hello, I have a bifold closet door from the 1970s. The track is at the top. I am missing one of the plastic slides that goes into the track. Can you help me identify it?

I need to replace this sliding door handle. The door locks at top and bottom of frame. Multipoint lock?

Good afternoon,In search of replacement posts/ urethane glide assembly for some older folding doors in my home built in the 1960's.Any help is greatly appreciated.Thanks,Mike

How to I fix or replace this. My mirror door does not sit in tracks on top

Cox 21-032 is written on the glide.

Old closet door trying to revive but only had those hardware. I would appreciate if you guys can help me find something like this or recommend any replacement parts for the sliding glass doors I have thanks in advance.

Hi , my name is Nicolae , I will like to know if you have the hardware for the bifold closet doors in our rental building as showed in the pictures. The first picture is shows the small parts of the hardware assembly for upper tract , holding the door by means of a pivot pin. I saw the pivot pin th ... (cont.)

One of the mirrored doors on my closet is cracked. It is a monarch mirrored sliding door.

I'm looking for two of these parts, thank you.

Custom Door & Mirror, Inc. mirrored bifold door 24 X 80 Looking to replace missing handle.

Bifold mirrored doors installed in 1984. The nylon slide/pivot in the top rail contains a slot into which the pin supporting the end of the door clips / hangs. Rail width is about 3/4". The slot on the left in the picture below of the slide/pivot has worn over time such that it no longer holds the p ... (cont.)

Here just need the rollers wheels that's all