Viewing all customer Discussions for:

Closet

I am replacing the exact same looking roller with 3/4 inch wheel with 1/8 inch offset however at the top of the part it sez "NO 452" . Is this the same model? Also, the doors these are on are very heavy wooden doors. Would it help to put more than two rollers on the door? Or maybe a two-wheel ro ... (cont.)

Can you help me id this lower door sweep,please. If you have a replacement? thank you

Any recs on a matching part? Thanks

Hi I'm trying to match my part, can you identify my Mirror door roller assembly.

I NEED A ROLLER ASSEMBLY HDI 4050J

Hello i want to replace pins for my steel bi fold doors I have larger doors than what i show here and many of the screw retainer plastic holders are broken

Looking for this bearing for trifold closet door

This sliding closet door hardware is probably from the 50's . We have two sets of these doors and after we took them down and repainted, we lost the bracket piece on the right side of the roller. It's l shaped and keeps the door in place. Do you carry anything like this?

I recently bought a house this is what is left of bedroom closet doors if you can tell me wha i need to order to repair thanks

Hello, Paul, Sr,I would like to repaint my metal bi-fold doors. We did this once, 20 years ago, when we first moved in to our 1964 era ranch home. My Dad, expert problem solver, helped us with that project, but he is no longer with us to consult - and I don't remember how we took them off the track ... (cont.)

Dear Paul: In these bifold mirror doors, I'm missing several parts. The sticker on the back says Arch Mirror and the track measures 1 3/16 " X 3/4" measured outside.Please advise if you carry the parts like pivot bracket, roll guide, corner connector, pivot pin, screw driver bottom pivot that would ... (cont.)

Hi, my house was built in 1980 and is full of metal bifold doors. Most are still in very good condition, but a couple are giving me trouble. I am looking for replacement guides for the bottom guide that moves, not the stationary pivot. The base that glides in the track is metal, not plastic. When I ... (cont.)

BI-FOLD DOOR

We need to replace our two 48" roller tracks. Not sure of the replacement part, so pictures are attached. Please let me know if you can help.

Need two end caps. Don't understand some assemblies have rubber washers and some don't. Are they necessary if the spring clip is on the shaft? Don't know if you sell the individual parts for the shafts or just the shaft and all accompanying parts. Let me know.Thanks,Marvin

I purchased the following parts for my bifold door: 21-062 - pivot 21-054 - guide pin do you have any video's showing how to replace these parts on a Leigh Full-VU bifold metal closet door? Thank you.

Top rollers missing roller wheels and need 48? bottom track.

These are for metal bifold doors from the mid-70s your website has a to 21-078 but it's too long. do you have something in the 4 3/4-in range

Will be happy also if you can detail how I remove the older parts and replace for the new ones. Thank you!!

What are the top tracks made out of? Aluminum, steel, etc?