Viewing all customer Discussions for:

Closet

I need these parts.. it fits into the door Trim.

We don't see anything that matches this exactly. Can you match it?

Both the front and rear doors have 7/16" offsets. Would the design or the track account for that. I want to be sure before ordering.

The pictures here are from a metal bifold door with veneer coating on the outside. They were part of my home when it was built in 1967. Some have been replaced, but I'd like to save--repair and paint this one.I am not able to get the lower right pin out of the floor. That is--the ones on the floor w ... (cont.)

Hi. we need 8 metal bifold door pin caps for our closet doors in our home. The hat bushing brim is 5/8 inch diameter and the hat bushing fits in a 13/32 diameter hole. It has a 1/2 inch overall height, it has a 1/4 inch hold in the center. Please let us know the part number so we can order it. ... (cont.)

Hello, I'm looking for replace the rollers. He hole pattern is 2.5" x 1.3", 1.5" OD concave roller, the assembly is approximately 1/2" thick. What would you recommend? Thank you, Mike

This a bottom guide sliding door. The plastic that keep door in place in railing to guide door is broken.How to replace that plastic part or replace the whole bottom guide

I need a replacement for the above.

Is this part still available. My bipass doors don't stay on the track because the plastic piece 4023? doesn't stay in the track because the mail part of the piece breaks.

My hall closet bifold door came off the track and the piece (Photo 3) that holds it on the tract broke off. The pieces on the top of the door are still on the door (photo 1&2). How do I fix this and what do I need to do so.?

I think I have the base of this piece, but I can't get it out of the furniture. I do not have the spring or the piece that the spring pushes into the hole in order to attach the door. Can this hardware be disassembled?

Hello, I need the plastic track guides for Stanley 4011 roller assembly or equivalent. Please advise. Thanx, Bill

Will this fit my 3/4 inch thick door?

have metal bifold closet doors. The speed pins are black in color. I tried to heighten the door with the speed pin, but it very quickly dropped down as if the speed pin was stripped. Now the doors sit and rub against the floor when opening and closing. Is the speed pin the only item used to set the ... (cont.)

I have about nine ACME folding doors in a home we just purchased in FL. They are all in varying states of operation and all apparently due to the missing peices of hardware. I took photos of the one that does indeed work, see attached, in the hopes that you could identify replacement parts for me. T ... (cont.)

Hi these are pics from the top of a sliding glass wardrobe. You see the pics with the nylon runners on the rail and also with them broken and just the metal wheel on the rail..We believe it's an acme/Stanley part...Any ideas regarding replacement will be appreciated...many thanks ... (cont.)

I see from previous posts that your 23-079 may be the part I need, but I don't see how it will attach to the top of the frame. Do you have any other photos of the part or dimensions on the underside? Thanks

These pieces attach to the bottom of the sliding door and ride in the groove on the floor. They are about 21/2 inches long but I need them to be 5 inches long.

I need in the Picture 1 the plastic insert to help slide the door left and right. Current picture is of the insert at end of door that keeps it set. Also, need the pole that goes to the door. I am not sure if the pole in the door is part of the unit screwed onto the door or not.

It has printed on it: ACME Pat#3750337