Viewing all customer Discussions for:

Closet

Hi hi after some clips for glass sliding doors have some numbers for you maybe they will help probably 12 years ago Pat 1430882 0337 The plastic part many thanks Paul

These were installed by the previous owner but the closet doors were placed on the wrong closet. How do I remove them to switch the the proper closet? I can unlock them but haven?t gotten past that.

I need help locating a replacement top roller for a STANLEY 00-5024 part. Thank you.

Dear Sir We are trying to find replacement parts for our closet glass doors The maker of the doors was Charmac Inc. Attached are pictures of the parts and broken parts.

I'm sorry-but I am having a hard time deciding which replacement pins (bottom and top) are required for these doors. This set has bent items, as well as one other set that I have-both bottom and top. I also included a photo of the original manufacturer. Please let me know what else you require to he ... (cont.)

Hi, I could not find any part numbers or markings on the doors or hardware. It appears over the years that they have been painted over. I would like to replace all the hardware - what parts do I need? Also, I notice that the track that you sell is not as wide as the one I have, but will it work? ... (cont.)

I need these parts.. it fits into the door Trim.

We don't see anything that matches this exactly. Can you match it?

Both the front and rear doors have 7/16" offsets. Would the design or the track account for that. I want to be sure before ordering.

The pictures here are from a metal bifold door with veneer coating on the outside. They were part of my home when it was built in 1967. Some have been replaced, but I'd like to save--repair and paint this one.I am not able to get the lower right pin out of the floor. That is--the ones on the floor w ... (cont.)

Hi. we need 8 metal bifold door pin caps for our closet doors in our home. The hat bushing brim is 5/8 inch diameter and the hat bushing fits in a 13/32 diameter hole. It has a 1/2 inch overall height, it has a 1/4 inch hold in the center. Please let us know the part number so we can order it. ... (cont.)

Hello, I'm looking for replace the rollers. He hole pattern is 2.5" x 1.3", 1.5" OD concave roller, the assembly is approximately 1/2" thick. What would you recommend? Thank you, Mike

This a bottom guide sliding door. The plastic that keep door in place in railing to guide door is broken.How to replace that plastic part or replace the whole bottom guide

I need a replacement for the above.

Is this part still available. My bipass doors don't stay on the track because the plastic piece 4023? doesn't stay in the track because the mail part of the piece breaks.

My hall closet bifold door came off the track and the piece (Photo 3) that holds it on the tract broke off. The pieces on the top of the door are still on the door (photo 1&2). How do I fix this and what do I need to do so.?

I think I have the base of this piece, but I can't get it out of the furniture. I do not have the spring or the piece that the spring pushes into the hole in order to attach the door. Can this hardware be disassembled?

Hello, I need the plastic track guides for Stanley 4011 roller assembly or equivalent. Please advise. Thanx, Bill

Will this fit my 3/4 inch thick door?

have metal bifold closet doors. The speed pins are black in color. I tried to heighten the door with the speed pin, but it very quickly dropped down as if the speed pin was stripped. Now the doors sit and rub against the floor when opening and closing. Is the speed pin the only item used to set the ... (cont.)