Viewing all customer Discussions for:

Closet

Hi! One of the sliding doors wheels broke down. They are old type. What would be the best time to replace it?

Missing 1 plastic roller that retractable pin should go into.

Hello! Home has a 3 bifold door setup. Two lefts and one right. Far Left and right doors are operational and have 90 degree bottom pivots. Middle door floor bracket appears to be missing something. Cannot locate a flat bottom pivot on the web. Any help would be appreciated. Tried a flat pivot wit ... (cont.)

Do you have anything close to this?

Original 1972 sliding wardrobe doors on a 5' track. They slide into a narrow place on the inside frame. I have tried to reconfigure with a newer pair of rollers, but it's not really working out. Thank you

Looking for a zero offset roller for my closet doors I ordered 23-177 as it is only 1/16" offset and thought it had the best shot at working I also see 23-015, but i'm not sure

Hello, I need help with identifying this Truporte closet glass sliding door bottom guide. Thanks.

For Fenestra Incorporated metal closet door. 4" L X 5/16" W Need 1 of each photo.

I meed top & bottom tracks for twp mirrored sliding closet doors.

26 4

Hi I have the following track for my sliding door. It is about 70.5 inches in length. I would like to replace 4 of them. Could you recommend the part that would be a suitable replacement for this in a similar color? I believe it would be Product Code: 23-242 (72" sliding mirror door bottom track ... (cont.)

Can't find this bottom roller for my bedroom glass sliding doors

Hi - the white wheel on the part (photo attached) has broken so it makes a loud noise when we slide the mirror. Do you have a replacement part?

I'm trying to find this part of my sliding door. I live in Switzerland and have no idea where the door was manufactured. Thanks in advance

This is part of a sliding closet door. The door is hung on a track. The part in the picture is screwed into the top of the door. The plastic piece broke and now I need a replacement part, but I don't know the details of the door or the hardware. Please let me know if you have this part or if you ... (cont.)

The one in the picture is ok. But other one on the door broken. Do you have such?

This is the bottom hardware that has two plastic prongs that keep the bottom of the door in the track. The top piece has the roller. This bottom piece has two plastic "fingers" that broke, now the door is flopping around on the bottom.

This is a Stanley monarch full mirrored bifold door. I'm looking for the top and bottom are the same plastic roller that fits inside the track photograph is of the top. It's in fairly good shape. The bottom one has disintegrated completely away. The plastic part it's about 3/4 of an inch wide by 1/4 ... (cont.)

Good morning! I need to replace all of the hardware on a pair of slicing mirror closet doors. I read the exact ones I need have been discontinued but have been replaced. Would you mind sending me the links to what I need to order for the replacement parts? I am attaching a photo of the ones I cu ... (cont.)

Looking for these parts