Viewing all customer Discussions for:

Closet

I have a 5 ft opening with metal bifold doors. I am missing the track and the support bracket that mounts to the floor on each side of opening.

Hello, I am trying to fix old (~1958) aluminum (probably) Bi-folding closet doors - I need bottom track (23" length x 3/8" deep and 3/8"wide) and replacement parts for top and bottom (please find attached pictures). I do not have any numbers on parts. Thank you, Jane.

I have KennaTrack rear closet sliding door roller with a broken roller. Front-3/4 and Rear-1 3/8. What is the replacement part? Thanks, Paul

I ordered part# 17-4264Y-000 off Amazon as a replacement part for a missing wheel runner on a closet door. The new part didn't fit. When the clips went around the bottom, the upper hook that slides into the metal door frame was about 1/4" too short to fit in the slot. Is there a different part I nee ... (cont.)

The peg on top loses its spring (even replacements from Home Depot) and roller dusk on top won't stay in track. Peg/pin on bottom will not stay in hole/bracket on floor. There is no track along bottom of any. We have eight closets like this. Most with double bifold sliders. I love them. My husband's ... (cont.)

I need these rollers for my sliding doors.

I am trying to decide between products 23-114 and 23-120. What are the main differences between the two?

Hello! I have bifold doors installed, but want to replace the track with the brown one (23-450). I plan to re-use the bottom hardware. For the top part of the door, I assume I should get new hardware from you. Is my understanding correct, that along with the track 23-450 I'd need a top pivot guide ... (cont.)

hi , i need to buy the plastic parts for the bottom and top of the door , see attached picture thank you

I am looking for a pair of replacement rollers for a top mounted sliding screen patio door. Attached is a picture of the roller that I removed from the bottom of the door. As you can see the roller housing is broken on the other side it is also broken and the roller is missing. Do you have anything ... (cont.)

Hi I am looking to replace the track just like this one for my other closet door . The track itself on this one measures 31 inches . The bifold doors measure 31.5

Attached picture of door and rail And plastic guild. Do you recognize and have that part?

Is it possible to replace one of the bottom slider alignment pieces. (Nylon came off assembly) have a new one.

Hello I assume that part # 23-215 would include the roller wheel. I assumed wrong. Moving forward I would like to purchase the roller wheel for # 23-215. Now I tried to search for it using multiple combinations of the following words: roller wheel, 23-215, Bybass bottom guide. Roller wheel show me ... (cont.)

Hi I have a closet door roller that is broken. The cupped nylon part is gone so I need a new assembly. Based on the parts I see you have, the 23-043 roller looks like the one I need. I have the door removed however the assembly doesn't come out. The roller assembly is sandwiched into the frame ,mirr ... (cont.)

Im looking for replacements for these pieles. Thank you.

I am wondering if:1. you think your part # 23-042 "Mirror Wardrobe Door Roller Assembly Round" boss matches my photos. I measured and the measurements seem to fit.2. If I just slide the old wheel assembly out after taking the door off the tracks, and slide a new assembly over the currently installed ... (cont.)

Need to find this part If possible THANKS SO MUCH!

Hello, we are updating the master bedroom closets and the old bi-fold doors have a bottom track that is installed against the concrete. We can't use the bottom bracket that came with the new doors due to the old track installed on the concrete and we don't want to redo all the flooring (again). Woul ... (cont.)

My wife had bought these Stanley monarch mirrored/brass bypass doors at habitat restore and of course there was no tracks with them an one of the wheels were missing. It looks like I just need the rubber for the wheels. So now she loves them and must be hung. I went to all local hardware store and c ... (cont.)