Viewing all customer Discussions for:

Closet

It is for a sliding mirror door the only sticker on the door is for independent mirror industries the top part is stamped 20121 and I don't see a stamped number on the bottom track wheel.

I have a fitted wardrobe that has 2 sliding mirrored doors The parts say "acme" on the metal part it says pat 430862 pat 975 on the plastic part it says 4043 Attached a picture

I need the replacement for this closet door wheel. I need 4 of them. ? Can you tell me if you have them?

I need to replace one of these and also need an extra cap. I have the cap identified and in my cart now with floor/ceiling rail attachment clip. this is my second request for parts - i just sent one for the fixed pin that also goes with this set of doors.

I need to replace one of these "fixed Pin" this one does not have a spring. I've identified several other parts and have an order to place and hope to do so shortly.

Need bottom bracket for my closet. Need IMG_7881 Qty: 4. Marking on bracket is 10123 IMG 7865 is similar Bottom bracket on my other mirror closet.

Which one may I use? Do you have this one? See pic. Thanks.

We have Stanley mirrored sliding closet doors. Door hardware is in good shape but need to replace the track. Closet door opening is 58.5 inches. Current track is about 3.5 inches wide. Attached are pics of the wheels and the track.

I am looking for top roller assembly for a glass door. The part says Ramtrack on it. It is loose and moves when the door is slid side to side. The others are secure and do not move.

I have wood bi-fold door and the top guide rollers on 2 sets of doors have broken. After looking thru your inventory I failed to locate the size rollers I need. My top guide rollers measure smaller than ¾" and bigger than 5/8". It also appears to be between 16 MM & 18 MM. If you can help me find ... (cont.)

Searching for the plastic tip that that goes on top of a folding closet door and keep the door in place. Top part of the tip is amount 3/4" in length.Thanks in advance,Fred

If I am ordering 23-272 track, will the 23-070 roller be the correct item?

Need to replace this bracket with info on how to remove old one and install new one. Thanks. Bryan

This is an old cheap part, I'm trying to find one similar for the other door. 2 3/8" long x 1" wide x 3/8" high. 7/16" opening. Just trying to avoid replacing all of the hardware.

Looks like the uploaded pics were rotated - sorry. I need the upper rollers/hardware (excluding tracks) for Stanley Monarch sliding, mirrored, closet doors. I have attached a pic of the label from the back of the door showing the model number. Please let me know what the part number is for the corr ... (cont.)

I am looking for the replacement posts for this bivalve door that has both an upper and lower tract. I have not been able to find. Most all of the new doors only have an upper track. Thanks for your help

1.5 in mirror closet door roller for metal frameThe roller was attached on the left side not from the bottom.

this looks like your 23=041 convex but your width measurement is 3 1/16 - mine is 3"- your height is 3 1/4 - mine is 3 5/8 will this work or is there something else ?this is for a mirror closet door

Hi Do you have the above hardware?

Please help to identify this pin for us. Plastic receiver at bottom is broken off. Need new one. Thanks!